A Reconfigurable Impedance Matching Network Employing RF-MEMS Switches
نویسندگان
چکیده
We propose the design of a reconfigurable impedance matching network for the lower RF frequency band, based on a developed RF-MEMS technology. The circuit is composed of RF-MEMS ohmic relays, metal-insulatormetal (MIM) capacitors and suspended spiral inductors, all integrated on a high resistivity Silicon substrate. The presented circuit is well-suited for all applications requiring adaptive impedance matching between two in principle unknown cascaded RF-circuits. The fabrication and testing of a monolithic integrated prototype in RFMEMS technology from ITC-irst is currently underway.
منابع مشابه
A Reconfigurable Active Array Antenna System with the Frequency Reconfigurable Amplifiers Based on Rf Mems Switches
In this paper, a frequency reconfigurable active array antenna (RAA) system, which can be reconfigurable at three different frequency bands, is proposed. The proposed RAA system is designed with a novel frequency reconfigurable front-end amplifiers (RFA) with the simple reconfigurable impedance matching circuits (RMC) with the MEMS switches. With the MEMS switch, the RFA is realized without any...
متن کاملDevelopment of Reconfigurable Antenna for Advanced Tracking Technology
Received Jan 29, 2018 Revised Mar 28, 2018 Accepted Apr 17, 2018 This paper focuses on the design and fabrication of reconfigurable multiband antenna for RFID and GPS as an advance tracking technology for various applications that achieve a physically compact, planar profile and sufficient bandwidth. The antenna can be reconfigured as single band at 1.275 GHz for GPS applications when the switc...
متن کاملDesign, Analysis, and Verification of Ka-Band Pattern Reconfigurable Patch Antenna Using RF MEMS Switches
Abstract: This paper proposes a radiating pattern reconfigurable antenna by employing RF Micro-electromechanical Systems (RF MEMS) switches. The antenna has a low profile and small size of 4 mm× 5 mm× 0.4 mm, and mainly consists of one main patch, two assistant patches, and two RF MEMS switches. By changing the RF MEMS switches operating modes, the proposed antenna can switch among three radiat...
متن کاملMONOLITHIC INTEGRATION OF RF MEMS SWITCH AND GAAS-MMIC PROCESS FOR RF SENSING APPLICATIONS B. Grandchamp, H. Maher, P. Frijlink OMMIC
This paper shows the promising results in the integration of low-loss and high isolation RF MEMS switch in OMMIC GaAs MMIC process line. This technology has been used to design building blocs (such as reconfigurable impedance matching network for reconfigurable LNAs) targeting phased arrays applications. This work is part of the FP7 EU-project MEMS-4-MMIC.
متن کاملReconfigurable RF Systems Using Commercially Available Digital Capacitor Arrays
Various RF circuit blocks implemented by using commercially available MEMS digital capacitor arrays are presented for reconfigurable RF systems. The designed circuit blocks are impedance-matching network, tunable bandpass filter, and VSWR sensor. The frequency range of the designed circuits is 0.4-4GHz. The MEMS digital capacitor arrays that are employed in the designs have built-in dc-to-dc vo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- CoRR
دوره abs/0802.3088 شماره
صفحات -
تاریخ انتشار 2007