Aqueous multiphoton lithography with multifunctional silk-centred bio-resists
نویسندگان
چکیده
Silk and silk fibroin, the biomaterial from nature, nowadays are being widely utilized in many cutting-edge micro/nanodevices/systems via advanced micro/nanofabrication techniques. Herein, for the first time to our knowledge, we report aqueous multiphoton lithography of diversiform-regenerated-silk-fibroin-centric inks using noncontact and maskless femtosecond laser direct writing (FsLDW). Initially, silk fibroin was FsLDW-crosslinked into arbitrary two/three-dimensional micro/nanostructures with good elastic properties merely using proper photosensitizers. More interestingly, silk/metal composite micro/nanodevices with multidimension-controllable metal content can be FsLDW-customized through laser-induced simultaneous fibroin oxidation/crosslinking and metal photoreduction using the simplest silk/Ag(+) or silk/[AuCl4](-) aqueous resists. Noticeably, during FsLDW, fibroin functions as biological reductant and matrix, while metal ions act as the oxidant. A FsLDW-fabricated prototyping silk/Ag microelectrode exhibited 10(4)-Ω(-1 ) m(-1)-scale adjustable electric conductivity. This work not only provides a powerful development to silk micro/nanoprocessing techniques but also creates a novel way to fabricate multifunctional metal/biomacromolecule complex micro/nanodevices for applications such as micro/nanoscale mechanical and electrical bioengineering and biosystems.
منابع مشابه
All-water-based electron-beam lithography using silk as a resist.
Traditional nanofabrication techniques often require complex lithographic steps and the use of toxic chemicals. To move from the laboratory scale to large scales, nanofabrication should be carried out using alternative procedures that are simple, inexpensive and use non-toxic solvents. Recent efforts have focused on nanoimprinting and the use of organic resists (such as quantum dot-polymer hybr...
متن کاملChemical Amplification Resists for Future Lithography
The technologies for future lithography have been proposed, such as i-line phase-shifting lithography, deep-UV lithography and electron beam lithography. We have proposed several types of chemical amplification resist systems for future lithography. These are based on the change in dissolution rate by acid catalyzed reaction for aqueous development: dissolution inhibitor to dissolution promoter...
متن کاملpH-sensitive multiwalled carbon nanotube dispersion with silk fibroins.
Multiwalled carbon nanotubes (MWCNTs) are considered to be ideal multifunctional materials for biorelated applications, but there is still some controversy regarding their toxicity. In addition, the poor dispersibility of MWCNTs in either water or organic solvents has limited their practical applications. Therefore, obtaining a good dispersion is one of the key issues in their applications. In ...
متن کاملNovel and simple route to fabricate fully biocompatible plasmonic mushroom arrays adhered on silk biopolymer.
A fully biocompatible plasmonic quasi-3D nanostructure is demonstrated by a simple and reliable fabrication method using strong adhesion between gold and silk fibroin. The quasi-3D nature gives rise to complex photonic responses in reflectance that are prospectively useful in bio/chemical sensing applications. Laser interference lithography is utilized to fabricate large-area plasmonic nanostru...
متن کاملNear-Field Multiphoton Nanolithography Using an Apertureless Optical Probe
Near-field multiphoton optical lithography is demonstrated by using ~120 fs laser pulses at 790 nm in an apertureless near-field optical microscope, which produce the lithographic features with ~ 70 nm resolution. The technique takes advantage of the field enhancement at the extremity of a metallic probe to induce nanoscale multiphoton absorption and polymerization in a commercial photoresist, ...
متن کامل