A New Flux and Stator Resistance Identifier for AC Drive Systems
نویسندگان
چکیده
formance is analyzed for flux vector and indirect field oriented controllers. A new technique-the back electromagnetic force (BEMF) detector-for reducing the adverse effects of stator resistance on field oriented control is presented and evaluated through simulation and experimental results. The BEMF detector is shown to reduce the impact of the stator resistance and provides a stator resistance estimate. The detector is compatible with most control strategies and with or without position feedback.
منابع مشابه
A Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer
This paper presents a new adaptive Sliding-Mode flux observer for speed sensorless and rotor flux control of three-phase induction motor (IM) drives. The motor drive is supplied by a three-level space vector modulation (SVM) inverter. Considering the three-phase IM Equations in a stator stationary two axis reference frame, using the partial feedback linearization control and Sliding-Mode (SM) c...
متن کاملبهبود عملکرد درایو کنترل سرعت موتور القایی در محدوده ی سرعت های پایین و بالا با جبران ساز شار روتور
One of the most important control methods in induction motor is direct vector control. This method is based on rotor flux estimation using stator voltage. The machine voltage is low in The voltage model for low speed and voltage drop over the stator resistance is not negligible in front of stator voltage. Thus the stator flux estimation using voltage method is not precise. Some methods are base...
متن کاملIncreasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds
A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the r...
متن کاملA Novel MRAS Based Estimator for Speed-Sensorless Induction Motor Drive
In this paper, a novel stator current based Model Reference Adaptive System (MRAS) estimator for speed estimation in the speed-sensorless vector controlled induction motor drives is presented. In the proposed MRAS estimator, measured stator current of the induction motor is considered as a reference model. The estimated stator current is produced in an adjustable model to compare with the measu...
متن کاملSteady State Performance Improvement of Dtc Im Drive under Parameter and Transduction Errors
This paper presets steady state behavior of Direct Torque Control (DTC) of Induction motor (IM) drive. As in direct torque and flux control scheme electromagnetic torque and stator flux magnitude of induction motor drive is limited in closed loop without shaft sensors voltage modulator. This values are calculated with the help of dc link voltage of inverter and stator current. As during estimat...
متن کامل