Detecting the Transition of Creep RateControlling Process in AlMg SolidSolution Alloy through Instrumented Indentation
نویسندگان
چکیده
Detecting the Transition of Creep RateControlling Process in AlMg SolidSolution Alloy through Instrumented Indentation Hidenari Takagi1,1, Ming Dao2, Masami Fujiwara3 and Masahisa Otsuka4,2 1Department of Mechanical Engineering, College of Engineering, Nihon University, Koriyama 9638642 2Department of Materials Science and Engineering, School of Engineering, Massachusetts Institute of Technology, Massachusetts 02139, USA 3Division of Applied Physics, College of Engineering, Nihon University, Koriyama 9638642 4Department of Materials Science and Engineering, Faculty of Engineering, Shibaura Institute of Technology, Tokyo 1088548
منابع مشابه
Prediction of the Constitutive Equation for Uniaxial Creep of a Power-Law Material through Instrumented Microindentation Testing and Modeling
Indentation creep tests and finite element simulations were performed on a model material to show that the constitutive equation for conventional uniaxial creep can be derived using the instrumented indentation testing technique. When the indentation pressure and the indentation creep rate are maintained at constant values of ps and _ 3⁄4inðsÞ, respectively, the contours of the equivalent stres...
متن کاملInvestigation of indentation derived creep response using constant load and constant strain rate methods
Time dependent plastic deformation in metals can occur at high temperatures. Typically the creep test is conducted to characterize the deformation features; however, the conventional uniaxial power-law creep test may be impractical for small scale materials. Accordingly, instrumented indentation techniques are frequently employed. This study concerns the employment of instrumented indentation t...
متن کاملExperimental and computational creep characterization of Al–Mg solid-solution alloy through instrumented indentation
Carefully designed indentation creep experiments and detailed finite-element computations were carried out in order to establish a robust and systematic method to extract creep properties accurately during indentation creep tests. Samples made from an Al–5.3mol%Mg solid-solution alloy were tested at temperatures ranging from 573 to 773K. Finite-element simulations confirmed that, for a power-la...
متن کاملExperimental and computational study on the load-jump tests of Al–Mg solid–solution alloy using instrumented indentation technique
Constant-load tests and load-jump tests were carried out using a microindenter in Al–5.3 mol% Mg solid–solution alloy. When the representative stress σ̄ beneath the indenter decreases to a critical stress level, σ̄c ∼= 61 MPa, during indentation creep at 573 K, the stress exponent n for creep changes from 5 (σ̄ > σ̄c) to 3 (σ̄ < σ̄c). With load-jump tests in the stress range of n= 3, instantaneous pl...
متن کاملCreep Characterization of Aluminum-Magnesium Solid-Solution Alloy through Self-Similar MicroindentationThis Paper was Originally Published in Japanese in J. Japan Inst. Metals 69 (2005) 348--355
Indentation creep tests were performed on an Al-5.3mol% Mg solid-solution alloy to examine whether mechanical properties can be extracted accurately from a testpiece, as small as a rice grain. A conical diamond indenter was pressed into a test surface with a constant load F at temperatures ranging from 0.60 to 0.65 Tm (Tm: the absolute liquidus temperature). When the representative flow stress ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005