EMC’04/Sendai Control of Unintentional Electromagnetic Waves from Digital Circuits: Efficient EMC Modeling of Devices and PCBs
نویسندگان
چکیده
A research project has been carried out for the last five years, the subject of which is to develop effective methods to control electromagnetic noise radiation from digital electronic devices. Engineering approaches were chosen and some new modeling methods of electromagnetic phenomena around a printed circuit board are shortly described in relation to EMI subjects. Those results have been combined into EMI simulator software, HISES, which works very rapidly still retaining enough accuracy in EMC issues.
منابع مشابه
EMC’04/Sendai Three-wire Analysis Model to Predict SI and EMC Effects
Accurate driver and package models are necessary to analyze the signal integrity (SI) and electromagnetic compatibility (EMC) issues on digital circuits. 2-wire models that assume an ideal power distribution system (PDS) are commonly used in modeling the SI of signal lines. This assumption makes real SI and EMC analysis worthless or at least only useful under certain restrictions. In order to a...
متن کاملEMC’04/Sendai ELECTROMAGNETIC INTERFERENCE AMONG CABLES AND INTERCONNECTIONS : APPROXIMATIONS THROUGH HIERARCHICAL GRAPHS
Electromagnetic topology was introduced a few decades ago in order to bring some rules in analysing EMC of very large systems through a fluence graph of electromagnetic interactions. Establishing these graphs was made possible from application of the so-called "good shielding approximation". At cable or track level, such a procedure is investigated in this paper. Other approximations are introd...
متن کاملThree-Pole Analysis Model to Predict SI and EMC Effects
Accurate driver and package models are necessary to analyze the signal integrity (SI) and electromagnetic compatibility (EMC) issues on digital circuits. 2-pole models that assume an ideal power distribution system (PDS) are commonly used in modeling the SI of signal lines. This assumption makes real SI and EMC analysis worthless or at least only useful under certain restrictions. In order to a...
متن کاملImprovement of System Robustness through EMC Optimization
The electromagnetic compatibility (EMC) became a major concern for integrated circuits (ICs) during the last years. As the operating frequency has increased and the supply voltage has become lower, the electromagnetic emission as well as the susceptibility of integrated circuits increased tremendously. Generally speaking, EMC is defined as the ability of an electrical system to work properly in...
متن کاملEMC’04/Sendai ABSTRACT MODELING OF SIGNAL BEHAVIOUR IN INTERCONNECTED INTEGRATED CIRCUITS BASED ON BLACK BOX APPROACH AND MODEL ORDER REDUCTION
MODELING OF SIGNAL BEHAVIOUR IN INTERCONNECTED INTEGRATED CIRCUITS BASED ON BLACK BOX APPROACH AND MODEL ORDER REDUCTION Grzegorz Lubkowski 1 , Radoslaw Piesiewicz 1 , Werner John 2 FhG IZM / University of Paderborn, Berlin/Paderborn – Germany Fraunhofer Institute for Reliability and Microintegration – Advanced Systems Engineering Technologiepark 34, 33100 Paderborn E-mail: grzegorz.lubkowski@p...
متن کامل