Fabrication of Silicon Heterojunction Interdigitated Back-contacted (SHJ-IBC) solar cell
نویسندگان
چکیده
.................................................................................................................................................. iii List of Figures ........................................................................................................................................... iv List of Tables ........................................................................................................................................... vii
منابع مشابه
a-Si/c-Si Heterojunction for Interdigitated Back Contact Solar Cell
Initial experimental and numerical simulation results for interdigitated back contact silicon heterojunction (IBC-SHJ) solar cell, which combines the high voltage potential of heterojunction solar cells while avoiding the absorption losses and allowing high short circuit currents, are reported. Cells without intrinsic buffer layers were fabricated as a proof of concept. The cells with intrinsic...
متن کاملHigh efficiency black silicon Interdigitated Back Contacted solar cells on p- and n-type c-Si substrates
This work demonstrates the high potential of Al2O3 passivated black silicon in high efficiency Interdigitated Back Contacted (IBC) solar cells by reducing surface reflectance without jeopardizing surface passivation. Very low reflectance values, below 0.7% in the 300-1000 nm wavelength range, together with striking surface recombination velocities values of 17 and 5 cm/s on pand n-type crystall...
متن کاملEffect of Surface Passivation on Si Heterojunction and Interdigitated Back Contact Solar Cells
Silicon surface passivation of hydrogenated silicon (Si:H) thin films deposited by RF and DC plasma process was investigated by measuring effective minority carrier lifetime (τeff) on Si <100> and <111> wafers and correlated with the silicon heterojunction (SHJ) cell performances in front emitter structure and interdigitated back contact (IBC) structure. Excellent surface passivation (τeff > 1 ...
متن کاملInkjet Printing of Isolation Layers for Back-Contacted Silicon-Heterojunction Solar Cells
For wafer based silicon solar cells, the combination of amorphous/crystalline silicon (a-Si:H/c-Si) heterojunction emitters (SHJ) [1] and back-contacted back-junction solar cell concepts (BCBJ) [2] offer a very high efficiency potential of around 24%. Stangl et al. proposed a relatively simple and therefore attractive cell concept comprising a two level metallization isolated by an insulation l...
متن کاملDevelopment of Screen-Printed Texture-Barrier Paste for Single-Side Texturization of Interdigitated Back-Contact Silicon Solar Cell Applications
Continuous cost reduction of silicon-based solar cells is needed to lower the process time and increase efficiency. To achieve lower costs, screen-printed texture-barrier (SPTB) paste was first developed for single-side texturization (ST) of the interdigitated back-contact (IBC) for silicon-based solar cell applications. The SPTB paste was screen-printed on silicon substrates. The SPTB paste wa...
متن کامل