Advanced Construction Materials for High Temperature Steam PEM Electrolysers
نویسندگان
چکیده
منابع مشابه
Syngas (CO-H2) production using high temperature micro-tubular solid oxide electrolysers
CO2 and/or H2O were reduced to CO/H2 in micro-tubular solid oxide electrolysers with yttria-stabilized zirconia (YSZ) electrolyte, Ni-YSZ cermet cathode and strontium(II)-doped lanthanum manganite (LSM) oxygen-evolving anode. At 822 C, the kinetics of CO2 reduction were slower (ca. 0.49 A cm 2 at 1.8 V) than H2O reduction or co-reduction of CO2 and H2O, which were comparable (ca. 0.83 to 0.77 A...
متن کاملNickel based electrocatalysts for oxygen evolution in high current density, alkaline water electrolysers.
A number of nickel based materials are investigated as potential oxygen evolution catalysts under conditions close to those met in modern, high current density alkaline water electrolysers. Microelectrodes are used to avoid distortion of voltammetric data by IR drop even at the high current densities employed in such water electrolysers. High surface area nickel metal oxides prepared by cathodi...
متن کاملMaking the hydrogen evolution reaction in polymer electrolyte membrane electrolysers even faster.
Although the hydrogen evolution reaction (HER) is one of the fastest electrocatalytic reactions, modern polymer electrolyte membrane (PEM) electrolysers require larger platinum loadings (∼0.5-1.0 mg cm(-2)) than those in PEM fuel cell anodes and cathodes altogether (∼0.5 mg cm(-2)). Thus, catalyst optimization would help in substantially reducing the costs for hydrogen production using this tec...
متن کاملDevelopment of low-cost, high-efficiency PEM Fuel Cells
It is generally accepted that the global demand for energy will dramatically rise in the future. Fuel cells are promising as efficient, non-polluting power sources that produces little noise and have no moving parts. The main problem is the high cost of manufacturing the devices, which has largely limited them to a handful of exotic applications. The objective of the present project is the deve...
متن کاملVI.6 Adaptive Process Controls and Ultrasonics for High Temperature PEM MEA Manufacture
Completed unplanned but promising • experimentation on the use of ultrasonics for pressing of low-temperature (Nafion) MEAs. Submitted two publications for review based on • early unplanned experimentation and testing of low-temperature MEAs produced with both thermal pressing and ultrasonic pressing. Completed modifications of commercial ultrasonic • press and construction of custom tooling fo...
متن کامل