The Jaws of Nereis: Microstructure and Mechanical Properties
نویسندگان
چکیده
The jaws of the marine worm Nereis sp. are made of protein fibers and are reinforced by zinc. Here we study a transverse section through the jaw using optical microscopy and nanoindentation. Optical microscopy images demonstrate a complex microstructure which includes channels that extend throughout the jaw. We suggest that these channels may be related to jaw remodeling. The mechanical results reveal spatial variations in both indentation hardness and reduced modulus. Specifically, the toothed side of the jaw (used for grasping food) is harder than the remainder of the jaw and the very exterior surface is hardest.
منابع مشابه
Critical role of zinc in hardening of Nereis jaws.
Hardening of invertebrate jaws and mandibles has been previously correlated to diverse, potentially complex modifications. Here we demonstrate directly, for the first time, that Zn plays a critical role in the mechanical properties of histidine-rich Nereis jaws. Using nanoindentation, we show that removal of Zn by chelation decreases both hardness and modulus by over 65%. Moreover, reconstituti...
متن کاملHalogenated veneers: protein cross-linking and halogenation in the jaws of nereis, a marine polychaete worm.
Mineralized tissues are produced by most living organisms for load and impact functions. In contrast, the jaws of the clam worm, Nereis, are hard without mineralization. However, they are peculiarly rich in halogens, which are associated with a variety of post-translationally modified amino acids, many of which are multiply halogenated by chlorine, bromine, and/or iodine. Several of these modif...
متن کاملZinc and mechanical prowess in the jaws of Nereis, a marine worm.
Higher animals typically rely on calcification to harden certain tissues such as bones and teeth. Some notable exceptions can be found in invertebrates: The fangs, teeth, and mandibles of diverse arthropod species have been reported to contain high levels of zinc. Considerable quantities of zinc also occur in the jaws of the marine polychaete worm Nereis sp. High copper levels in the polychaete...
متن کاملEffect of Microstructure and mechanical properties of horizontal continuous cast pipe of CuZn40Al1 alloy
Abstract: Horizontal continuous casting is widely used to produce semi-finished and finished metallic products. Homogeneity in metallurgical characteristics and mechanical properties in such products is of importance. In the present work microstructure and mechanical properties of a horizontal continuous cast pipe have been studied. Microstructural features were investigated by an optical mi...
متن کاملThe effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels
Bainitic transformation at low transformation temperatures leads to a microstructure involving fine plates of bainitic ferrite and thin films of retained austenite. This microstructure has shown ultimate tensile strength of about 2.2 GPa, noticeable uniform elongation in the range of 5 to 30%, hardness values of about 600 to 670 HV and impact toughness in the range of 30 to 40 MPa m1/2. With ca...
متن کامل