Modulation technique to reduce EMI in power multiconverters
نویسندگان
چکیده
A new technique to reduce EMI in modular power multiconverters is described. The technique is based on a combination of switching frequency modulation and a variable delay between commutation signals of the single converters. The proposed technique has been validated experimentally in a four converters parallel topology. A significant EMI reduction has been obtained with regard to conventional techniques.
منابع مشابه
Use of sigma-delta modulation to control EMI from switch-mode power supplies
Conducted electromagnetic interference (EMI) is a major cause of concern in switch-mode power supplies (SMPSs) which commonly use standard pulsewidth modulation (PWM). In this paper, Sigma–Delta ( ) modulation is proposed as an alternative switching technique to reduce conducted EMI from an SMPS. The result of using modulation is a spread in the spectrum of the conducted emissions so that large...
متن کاملAn Efficient Technique for EMI Mitigation in Fluorescent Lamps using Frequency Modulation and Evolutionary Programming
Electromagnetic interference (EMI) is one of the serious problems in most electrical and electronic appliances including fluorescent lamps. The electronic ballast used to regulate the power flow through the lamp is the major cause for EMI. The interference is because of the high frequency switching operation of the ballast. Formerly, some EMI mitigation techniques were in practice, but they wer...
متن کاملUse of Sigma-Delta Modulation to Control EM1 from Switch-mode Power Supplies
Conducted Electromagnetic Interference (EMI) is a major cause of concern in switchmode power supplies (SMPS) which commonly use standard pulsewidth modulation (PWM). In this paper, Sigma-Delta (CA) modulation is proposed as an alternative switching technique to reduce conducted EM1 from SMPS. The result of using EA modulation is a spread in the spectrum of the conducted emissions so that large ...
متن کاملAnalysis and Spectral Characteristics of a Spread-Spectrum Technique for Conducted EMI Suppression
Frequency modulation (FM) and random switching methods have been used for reducing conducted electromagnetic interference (EMI) in power converters. Limited theoretical studies and comparisons of these schemes, however, are available. In this paper, a detailed analysis and the spectral characteristics of a random carrier-frequency (RCF) technique for suppressing conducted EMI in an offline swit...
متن کاملNeural Network Based Control of AC-AC Converter for Voltage Sags, Harmonics and EMI Reduction
A Neural Network based AC-AC voltage restorer is proposed for voltage sags and PWM type active power filter is used for voltage harmonics compensation and EMI reduction. The objective is to apply the neural network switching control technique to the AC-AC voltage restorer to reduce time delays during the switching conditions and switching losses. The aim of the IGBTs used in the AC-AC voltage r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Electronic Express
دوره 6 شماره
صفحات -
تاریخ انتشار 2009