Evaluation of trace element availability from secondary metallurgical slag generated in steelmaking by sequential chemical extraction

نویسندگان

  • M. Mäkelä
  • I. Välimäki
  • O. Dahl
چکیده

During carbon steel manufacture, slag residues are generated to remove material impurities from liquid metal and thus control the quality of carbon steel. As the utilization of secondary metallurgical slags is not as efficient as those of primary slags, a comprehensive characterization of steel ladle slag was performed. Pseudo-total concentrations of a wide range of elements were determined during a 6-week sampling period with relevant physical and chemical properties, sequential extraction of trace elements, and parallel mineralogical characterization of extraction residues from a representative combined sample. According to the results, only Cr and V occurred in elevated concentrations with respective 6-week mean values of 198 and 310 mg kg (d.w.). The residual standard deviation of the weekly pseudo-total concentration values of the aforementioned elements (24 and 31 %, respectively) indicated that significant variation in the concentration of trace elements can occur due to fluctuation in process conditions and/or slag characteristics. The sequential extraction procedure suggested potential phytoavailability of V (123 mg kg, d.w., amounting to 41 % of the respective pseudo-total concentration) through, e.g., changes in prevailing redox conditions. Although the analytical approach was validated by the analysis of a certified reference material and the calculation of extraction recoveries, the mineralogical characterization of parallel extraction residues indicated non-selectivity of the procedure coupled with potential redistribution phenomena during extraction with hydrogen peroxide and ammonium acetate.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

شکل‌های شیمیایی و قابل استخراج به وسیله DTPAآهن در خاک‌های تیمار شده توسط سرباره و لجن کنورتور کارخانه ذوب‌آهن اصفهان

Iron deficiency is most widespread among plant nutrients. Nowadays, different materials such as inorganic salts, organic chelates, soil acidifying materials and industrial wastes are used to correct iron deficiency. Slag and convertor sludge of steel factories are among the industrials wastes for this purpose. These materials contain considerable amount of iron produced in large quantities ever...

متن کامل

The Effect of Slag Modeling to Improve Steelmaking Processes

This paper attempts to illustrate the benefits of using slag models based on the thermodynamics of steelmaking reactions and the multi-dimensional modeling of phase equilibria. The use of mass balance calculations and the application of these personal computer-based slag models to the refinement of standard operating procedures can simultaneously result in shorter process times, more predictabl...

متن کامل

Recovery of Vanadium from Esfahan Steel Company Steel Slag; Optimizing of Roasting and Leaching Parameters

In this Study, vanadium recovery from the steelmaking converter slag was studied. Salt roasting-basic leaching is the process which was applied to separate and extract vanadium from steel making slag. Ground slag was roasted after mixing with determined quantities of sodium carbonate. The effect of time and temperature of roasting and sodium carbonate content were studied. The optimum temperatu...

متن کامل

Recycling Evaluation of Mill Scale in Electric Arc Furnace

A considerable amount of mill scale is generated from steelmaking plants annually. Although some industries use it as raw material however, since it contains iron in the form of FeO, Fe2O3, and Fe3O4, it can be considered as a valuable metallurgical raw material for iron and steelmaking industry as well. Thus, the aim of this study was to evaluate the possibility, efficiency, and consequences o...

متن کامل

Utilization of ironmaking and steelmaking slags

smelting of hammerable iron and its treatment in antiquity and Medieval produced also by-product: slag. Because of small yields of iron the process produced only small amounts of slag that did not attract attention of smelters concerning its possible use. the use of slag pieces was only accidental. a lot of slag pieces and blocks from slag pit shaft furnaces were used as a material for mound bu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013