Synthesis of Four-bar Motion Generation Considering Worst Case Joint Tolerances
نویسندگان
چکیده
Abstract— Four-bar motion generation is used to synthesize a mechanism which passes through or approximate prescribed rigid-body positions. This work will discuss the motion generation of four-bar mechanism with position tolerance variations due to joint running clearance. The tolerance variations study will be based on the standards of American National Standard Institute (ANSI). The new design constraint introduced in this paper will consider the joint tolerances and incorporate it into the displacement position matrix of coupler points described in the conventional planar four-bar motion generation models. The synthesized planar four-bar mechanism will produce tolerance limits for moving pivots and link length from which any mechanism can be synthesized to satisfy the prescribed coupler points with their prescribed tolerances. The included example demonstrates the synthesis of a four-bar mechanism with joint tolerances. 1
منابع مشابه
Synthesis of Five-bar Motion Generation with Gear Train Fabrication Tolerances
Geared Five-bar motion generation is used to synthesize a mechanism which passes through or approximate prescribed rigid-body positions. This work will discuss the motion generation of geared five-bar mechanism with position tolerance variations due to gear fabrication. The tolerance variations study will be based on the standards of American Gear Manufacturing Association (AGMA) and American N...
متن کاملDynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint
In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. In the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of ...
متن کاملPareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm
Four-bar mechanisms are widely used in the industry especially in rotary engines. These mechanisms are usually applied for attaining a special motion duty like path generation; their high speeds in the industry cause an unbalancing problem. Hence, dynamic balancing is essential for their greater efficiency. In this research study, a multi-objective differential evolution algorithm is used for P...
متن کاملA Comparative Study of Probabilistic and Worst-case Tolerance Synthesis
The tolerance design directly influences the functionality of products and production costs. Tolerance synthesis is a procedure that distributes assembly tolerances between components. To ensure that the selected components and its tolerances give the assembly tolerance less than a desired value, worst-case analysis is commonly used. Even though the worst-case analysis is used, there is still a...
متن کاملOptimal Four-Bar Linkage for the Stability and the Motion of the Human Knee Prostheses
The optimal design of human lower limb prostheses, in particular of knee devices, is fundamental in order to restore the lost functionality and aesthetic aspect of the amputee’s locomotion. Among all knee devices, the four-bar linkage is still the most widespread mechanism, since, despite its simplicity, it allows the prosthesis to be sufficiently stable and, at the same time, to replicate the ...
متن کامل