Effect of argon protection on the biological activity of acid etched titanium surface.

نویسندگان

  • Y-D Zhao
  • Y Gao
  • J Yue
  • X-L Ding
  • Y Deng
  • B Du
  • L Zhou
چکیده

OBJECTIVE As the contamination of implant surface seriously affects the early osseointegration of implants and reduces the survival rate of implants, it has attracted wide attention of researchers. The most oral titanium implants used in current clinical applications are stored in sealed packages. During the process of packaging, storage and usage, the implants inevitably contact air, which results in the surface contamination. As an inert gas, the argon has very inactive chemical properties and is routinely used as a protective gas to cut air pollution. In this study, we investigated whether argon protection can cut air pollution and maintain lasting surface biological activity of titanium implants. MATERIALS AND METHODS We prepared sandblasting etched titanium samples under air protection or under argon protection. The samples prepared under air protection were used as the control. With the scanning electron microscopy, the contact angle measurements and the X-ray photoelectron spectroscopy, we examined surface morphology, hydrophilicity, chemical structures and components of the implants prepared under two gas protections. By using beagles as the animal model, we assessed the bone guide of the implants prepared under argon protection and morphological changes of surrounding tissues. RESULTS While compared with those implants prepared under air protection, the surface morphology of implants prepared under argon protection did not change, which had preferable hydrophilicity, and there were differences in percentage of surface chemical elements and chemical structure. After 4 weeks, the bone-implant contact (BIC) in argon protection group was twice of the control group and the difference was statistically significant (p < 0.01). The Implant Niuchu experiments also proved that under argon protection, the implants would have good integration with the surrounding bone tissues. CONCLUSIONS This study revealed the implants prepared under argon can cut air pollution and have high bone guide property and biological activity.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Adult Stem Cells Properties in Terms of Commitment, Aging and Biological Safety of Grit-Blasted and Acid-Etched Ti Dental Implants Surfaces

Titanium (Ti) is one of the most widely used biomaterials for manufacturing dental implants. The implant surface properties strongly influence osseointegration. The aim of the present study was to in vitro investigate the characteristics of Ti dental implants in terms of mutagenicity, hemocompatibility, biocompatibility, osteoinductivity and biological safety. The Ames test was used to test the...

متن کامل

Effect of hydrofluoric acid concentration and etching time on the surface roughness of CAD/CAM ceramics

Introduction: Dental ceramics are considered as materials that can restore the appearance of natural teeth. Etching the inner surface of a ceramic restoration with hydrofluoric acid (HF) followed by using a silane coupling agent is a well-known and recommended method to increase the bond strength. The aim of etching on ceramic structure is to enhance the surface roughness (Ra) and energy and to...

متن کامل

The Effects of Different Titanium Surfaces on the Behaviour of Osteoblast-Like Cells

This study investigated the influence of different titanium surfaces on the differentiation of rat osteoblast-like cells (osteo-1). Osteo-1 cells were cultured on the following titanium surfaces: 1) pretreated, smooth surface (PT); 2) sandblasted and acid etched surface (SLA); and 3) sandblasted and acid-etched surface rinsed under nitrogen protection to prevent exposure to air and preserved in...

متن کامل

The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production

A modified sol-gel process has been found to significantly improve the photocatalytic activity of TiO2 nanoparticle in the process of solar hydrogen production. The surface of TiO2 nanoparticles were modified by the optimization of solvent of titanium precursor (acetic acid and/or ethanol) in the sol-gel method. A multi technique approach (SEM, XRD, FTIR, UV-DRS and TGA) was used to characteriz...

متن کامل

Surface properties and biocompatibility of acid-etched titanium.

The purpose of this study was to evaluate the effects of acid-etched titanium on the biological responses of osteoblast-like MC3T3-E1 cells. Four types of treatments (polishing, sandblasting, concentrated H2SO4 etching, and concentrated H2SO4 etching with vacuum firing) were carried out on the surfaces of commercially pure titanium (cpTi) disks. MC3T3-E1 cells were then cultured on the treated ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • European review for medical and pharmacological sciences

دوره 19 9  شماره 

صفحات  -

تاریخ انتشار 2015