Rolling Contact Fatigue in Ultra High Vacuum
نویسندگان
چکیده
منابع مشابه
Rolling contact fatigue of surface coatings—a review
The aim of this review is to survey the state of the art relating to the rolling contact fatigue (RCF) investigation of various overlay coatings and also, to ascertain the influence of design parameters such as the type of deposition process, coating material and thickness on the RCF performance. Rolling contact fatigue is a significant factor in the failure of components in rolling/sliding con...
متن کاملContact Fatigue
CONTACT FATIGUE is a surface-pitting-type failure commonly found in ball or roller bearings. This type of failure can also be found in gears, cams, valves, rails, and gear couplings. Contact fatigue has been identified in metal alloys (both ferrous and nonferrous) and in ceramics and cermets. Contact fatigue differs from classic structural fatigue (bending or torsional) in that it results from ...
متن کاملThe Effect of Cross-Rolling Process on Nanostructure of Al 1050 Alloy
The cross-rolling is a new process that results in significant evolutions in microstructure of the metallic sheets. In this study, an aluminium 1050 sheet was rolled up to 95% reduction in cross directions for ten passes. The rolled samples were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The rolled samples possess a high dislocation density and ultra-fin...
متن کاملA New Temper Rolling Force Model for Dry Thick Strip Considering Fully Elastic Contact
Temper rolling or skin pass rolling is one of cold rolling processes composed of a horizontal pass cold rolling mill stand. In this process, the thick strip is subjected to very light reduction (0.5–4%) in thickness in the presence of high friction amplitudes. One of the basic parameters of strip rolling processes is temper rolling force. A new rolling force model has been proposed for temper r...
متن کاملSynthesize And Investigate The Austenitic Nanostructural Propertise
The austenitic stainless steel (SS) has been used as a material for building ultra high vacuum (UHV) chamber. Recently significant efforts have been concerned a comparing the standard cleaned for ultra high vacuum, passivity stainless. In this work Austenitic nanocomposites were synthesize by sol- gel method. The morphologies and topographies of the samples h...
متن کامل