Unsteady simulation for optimal arrangement of dedusting airduct in coal mine heading face
نویسندگان
چکیده
To optimize dedusting efficiency in coal mines, a model of dust movement in heading roadway with farpressing-near-absorption ventilation system was built. The empirical drag force model was applied into the unsteady inter phase coupling modeling of air and dust flow. The Discrete Phase Modeling in Fluent was employed to solve the problem and unstructured grids were utilized to mesh the complex 3-D roadway with different airduct allocations. Results show that the dedusting efficiency with the dedusting fan in the air return side is obviously better than that with the fan in the middle of the heading machine. The dedusting efficiency decreases within creasing distance between air inlet and heading section. When this distance is 2.0mwith airduct in the air return side, it has the best dedusting efficiency; in which the dust concentration in the front of roadway after 60 s of digging and cutting decreases from 1150 mg/m3 to 365 mg/m3; the average dust concentration in roadway decreases from 597 mg/m3 to 144 mg/m3; and the total dedusting efficiency reaches up to 75.88%. © 2017 Published by Elsevier Ltd.
منابع مشابه
Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran
Increasing the production rate and minimizing the related costs, while optimizing the safety measures, are nowadays’ most important tasks in the mining industry. To these ends, mechanization of mines could be applied, which can result in significant cost reductions and higher levels of profitability for underground mines. The potential of a coal mine mechanization depends on some important fact...
متن کاملProbabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation
Performing a probabilistic study rather than a determinist one is a relatively easy way to quantify the uncertainty in an engineering design. Due to the complexity and poor accuracy of the statistical moment methods, the Monte Carlo simulation (MCS) method is wildly used in an engineering design. In this work, an MCS-based reliability analysis was carried out for the stability of the chain pill...
متن کاملStudying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping
The impact of blast-driven shocks on the safety and stability of the underground coal mines has been well established. The seismic imperfections resulting from blasting depend on the total explosive energy released during blasting and the closeness of the development tunnel face to the stope face. Also, the quality of the rock mass wherein the whole stope face is located might pose considerable...
متن کاملFundamental understanding of goaf gas displacement in longwall goaf
Fundamental understanding of the goaf gas distribution in a gassy coal mine is necessary for developing effective goaf gas drainage strategies in the longwall coal mine. The goaf gas was subjected to the surface and body forces that were classified depending upon whether they acted on the surface area or the volume of the gas element. Of these forces, the body forces were more predominant in di...
متن کاملA Power-Efficient Clustering Protocol for Coal Mine Face Monitoring with Wireless Sensor Networks Under Channel Fading Conditions
This study proposes a novel power-efficient and anti-fading clustering based on a cross-layer that is specific to the time-varying fading characteristics of channels in the monitoring of coal mine faces with wireless sensor networks. The number of active sensor nodes and a sliding window are set up such that the optimal number of cluster heads (CHs) is selected in each round. Based on a stable ...
متن کامل