Preparation and Characterization of Molecular Sieving Carbon by Methane and Benzene Cracking over Activated Carbon Spheres
نویسنده
چکیده
Molecular sieving carbon (MSC) for separating O 2 -N 2 and CO 2 -CH 4 has been prepared through chemical vapor deposition (CVD) of methane and benzene on activated carbon spheres (ACS) derived from polystyrene sulfonate beads. The validity of the material for assessment of molecular sieving behavior for O 2 -N 2 and CO 2 -CH 4 pair of gases was assessed by the kinetic adsorption of the corresponding gases at 25 o C. It was observed that methane cracking on ACS lead to deposition of carbon mostly in whole length of pores rather than in pore entrance, resulting in a reduction in adsorption capacity. MSC showing good selectivity for CO 2 -CH 4 and O 2 -N 2 separation was obtained through benzene cracking on ACS with benzene entrantment
منابع مشابه
Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites
In this study, nanoporous silica aerogel and silica aerogel-activated carbon composites have been synthesized using a water glass precursor by cost effective ambient pressure drying method. Equilibrium and kinetics of benzene and ethyl benzene adsorption on silica aerogel and its composites have been measured in a batch mode at tree weights of adsorbent. For the first time, the experimental dat...
متن کاملPreparation and Characterization of Activated Carbon derived from olive stone as adsorbent for Congo Red
Carbon activated powdered was prepared from activated carbon derived from olive stone. Then byusing the surface methodology, many parameters such as pH, furnace temperature (T), acid ratio,time of activation that affect on the qualities prepared activated carbon produced and its efficiencywere investigated. In addition, the adsorption of Congo Red onto the activated olive stone carbonactive was...
متن کاملMeasurement of Benzene in Air by Iranian Single-Wall Carbon Nanotubes
Background: Nanotechnology is a new approach that has been lionized in recent years. One of its applications is its consumption as an absorbent. In this study, the single-wall carbon nanotubes (SWCNTs) were used as an absorbent for sampling benzene in the air. Materials and Methods: For this study, SWCNTs manufactured by Iran and SKC’s activated charcoal were used for sampling benzene vapors....
متن کاملModeling of Activated Carbon Preparation from Spanish Anthracite Based on ANFIS Structure
Carbon nanostructures are famous structures which are used in several industries such as separation, treatment, energy storage (i.e. methane and hydrogen storage), etc. A successful modeling of activated carbon preparation is very important in saving time and money. There are some attempts to achieve the appropriate theoretical modeling of activated carbon preparation but most of them were almo...
متن کاملPreparation of Carbon Molecular Sieves from Pistachio Shell and Walnut Shell for Kinetic Separation of Carbon Monoxide, Hydrogen, and Methane
In this study, two Carbon Molecular Sieves using Pistachio shell (CMS P) and Walnut shell (CMS W) were prepared by a chemical vapor deposition method and used for pressure swing adsorption and separation of CO/H2 and CO/CH4. Adsorption isotherms of gases obtained for both CMS’s. The Dubinin-Radushkevich isotherm model was used for comparing pore volum...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007