Early Capture for Boundary Scan Timing Measurements
نویسنده
چکیده
Analog waveforms and delays can be measured using a simple extension of the IEEE 1149.x standards. Early capture samples data on a falling edge of TMS during the Update-DR state. Experiments suggest sub-nanosecond timing resolution.
منابع مشابه
Optimal Timing of Specimen Collection after Rash Onset for Diagnosis of Measles IgM Antibody
Antibody detection is the most versatile and commonly used method for measles diagnosis. Detection of specific IgM antibodies in a single serum specimen collected within the appropriate time after rash onset can provide a good presumptive diagnosis of current or recent measles infection and is the test of choice for rapid diagnosis of measles cases. So, optimal timing for collection of a sing...
متن کاملAn Implementation of IEEE 1149.1 to Avoid Timing Violations and Other Practical In-Compliance Improvements
An implementation of the IEEE 1149.1 standard (JTAG) is presented in this paper. Rules are given for removing gated clocks, registering of all the TAP controller outputs, and daisy-chaining the boundary-scan cell clocks, resets, and control signals in a direction opposite to that of TDI to TDO signal. Several major advantages are obtained as a result of these implementation rules. Timing issues...
متن کاملImproving Bus Test Via I, and Boundary Scan
This paper presents a systematic test methodology targeting bus line interconnect defects using IDDT testing and Boundary Scan. Traditional test is unable to detect all possible defects, especially timing-related faults. Open and short defects on interconnects between embedded modules can be detected by IDDT testing. Boundary Scan can provide accessibility to intemal buses. A statistical analys...
متن کاملFrom Circuit Simulation to Circuit Verification: An Internal + Boundary Scan-based Solution
Matching the results obtained from circuit simulation with those extracted from circuit functioning is a common stage of the final verification process. Many current verification techniques use the I/O vectors produced during functional and / or timing simulation, for creating the test vectors to be applied / compared against the circuit responses. Techniques that are more complete include extr...
متن کاملBoundary Shear Stress in a Trapezoidal Channel
This paper focuses on a hydraulic radius separation approach used to calculate the boundary shear stress in terms of bed and wall shear stress proposed in a trapezoidal channel. The average bed and sidewall shear stress in smooth trapezoidal open channels are derived after using Guo & Julien (2005) early equations taking a part of an investigation to cover both rectangular and trapezoidal chann...
متن کامل