Analysis of Resistive Forces Acting on the Bucket of LHD in the Scooping Task
نویسندگان
چکیده
In order to automate the scooping task, it is desirable that the resistive force acting on the bucket be obtained before the scooping is performed. The objective of this study is to derive theoretically the resistive forces acting on the bucket during scooping of piled rock fragments. First, the changes in the shape of the rock pile due to the penetration of it by the bucket are modeled. Based on this model, the resistive forces acting on the bucket are considered theoretically. Finally, it was confirmed that the calculated results obtained using the model agree well with the experimental results.
منابع مشابه
Estimation of Internal Condition in Piled Fragment Rocks by Use of Resistive Forces Acting on the Bucket of Wheel Loaders
In order to automate the scooping task, it is necessary to obtain the resistive forces acting on the bucket before the scooping is performed. In this study, empirical equations to predict the friction coefficient between the bucket and rocks, the friction coefficient among rocks and particle diameters were obtained by using the resistive forces which are measured at the beginning of the scoopin...
متن کاملAutonomous Scooping of a Rock Pile by a Wheel Loader Using Disturbance Observer
A controller for a miniature wheel loader is developed to scoop rock piles autonomously. During a scooping task operation, the load of the bucket varies momentarily according to the phase of scooping. Before the insertion of the bucket into the rock pile, the load is just the bucket weight, but after the insertion the reaction force from the rock piles is applied to the bucket. The values of th...
متن کاملA comparison of the required energy in loadingfor
In automating an excavation task it is required to deene a nominal trajectory for the motion of the excavator tool, so that its motion can be programmed and controlled. During the motion, the excavating tool (the bucket for instance, in the case of a loader), experiences the excavating forces that must be overcome by the active forces for moving the bucket, in order for the excavation to take p...
متن کاملStatic Force Analysis of Mini Hydraulic Backhoe Excavator And Evaluation Of Bucket Capacity, Digging Force Calculations
Rapidly growing rate of industry of earth moving machines is assured through the high performance construction machineries with complex mechanism and automation of construction activity. Design of backhoe link mechanism is critical task in context of digging force developed through actuators during the digging operation. The digging forces developed by actuators must be greater than that of the...
متن کاملPrediction of scour dimension in the Plunge Pools below Outlet Bucket with Artificial intelligence method
Accurate prediction of sediment scour hole dimensions downstream of hydraulic structures, e.g. the outlet bucket, is a complex and not straight forward engineering problem encountered worldwide. Because of the complexities of the study, its comprehensive, simultaneous including water flow, sediment and applying all of the effective variables involved in scouring it is not easy possible. Dimens...
متن کامل