Fracture void structure: implications for flow, transport and deformation
نویسنده
چکیده
This review focuses on studies of flow, transport and deformation processes at a scale of a single discontinuity. The paper provides an evaluation of: (1) various methods suggested for geometrical characterization of void structure; and (2) theoretical and practical problems arising from significant differences between the actual geometry of fracture void structure and its parallel plate representation. The use of an equivalent aperture concept is shown to be seriously misleading in: (a) evaluation of flow regime, and hence selection of appropriate flow laws; (b) correlating tracer and hydraulic tests, and assessment of solute transport properties; and (c) relating hydraulic and mechanical apertures, and predicting influence of stress perturbation and deformability.
منابع مشابه
Void-assisted plasticity in Ag nanowires with a single twin structure.
By employing the in situ transmission electron microscopy (TEM) technique, tensile deformation behaviors of a silver nanowire (NW) with a single twin structure were studied. Our observations revealed that the initial stage of plastic deformation was dominated by surface-mediated partial dislocation activities. Strikingly, the void formation and growth were shown to govern the later stage of pla...
متن کاملDamage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation
In the present research, damage mechanisms during room temperature uniaxial tensile testing of two different modern high strength dual phase steels,DP780 and DP980, were studied. Detailed microstructural characterization of the strained and sectioned samples was performed by scanning electron microscopy (SEM). The results revealed that interface decohesion, especially at the triple junctions of...
متن کاملFlow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions
In this paper, in order to study the flow behavior and elongation of as-cast ingots of SP-700 titanium alloy, hot tensile test was done in α/β dual phase and β single phase regions using strain rate of 0.1 s-1. Results showed that the hot tensile behavior of SP-700 in the α/β dual phase region (700-900 ºC) was different from the β single phase one (950-1100 ºC) due to the nature of alpha and be...
متن کاملSubchondral Insufficiency Fracture of the Femoral Head Treated with Core Decompression and Bone Void Filler Support
Subchondral insufficiency fracture of the femoral head (SIFFH) is characterized by acute onset hip pain without overt trauma. It appears as a low intensity band with bone marrow edema on T1-weighted MRI. The most common course of treatment is protected weight bearing for a period of several weeks. Total hip arthroplasty (THA) has been commonly used if the patient does not respond to the initial...
متن کاملFracture Permeability Alteration due to Chemical and Mechanical Processes: A Coupled High-Resolution Model
Reactive fluid-flow experiments in fractures subjected to normal stress suggest the potential for either increased or decreased permeability resulting from fracture-surface dissolution. We present a computational model that couples mechanical deformation and chemical alteration of fractures subjected to constant normal stress and reactive fluid flow. The model explicitly represents micro-scale ...
متن کامل