Leaf Movements of Indoor Plants Monitored by Terrestrial LiDAR
نویسندگان
چکیده
Plant leaf movement is induced by some combination of different external and internal stimuli. Detailed geometric characterization of such movement is expected to improve understanding of these mechanisms. A metric high-quality, non-invasive and innovative sensor system to analyze plant movement is Terrestrial LiDAR (TLiDAR). This technique has an active sensor and is, therefore, independent of light conditions, able to obtain accurate high spatial and temporal resolution point clouds. In this study, a movement parameterization approach of leaf plants based on TLiDAR is introduced. For this purpose, two Calathea roseopicta plants were scanned in an indoor environment during 2 full-days, 1 day in natural light conditions and the other in darkness. The methodology to estimate leaf movement is based on segmenting individual leaves using an octree-based 3D-grid and monitoring the changes in their orientation by Principal Component Analysis. Additionally, canopy variations of the plant as a whole were characterized by a convex-hull approach. As a result, 9 leaves in plant 1 and 11 leaves in plant 2 were automatically detected with a global accuracy of 93.57 and 87.34%, respectively, compared to a manual detection. Regarding plant 1, in natural light conditions, the displacement average of the leaves between 7.00 a.m. and 12.30 p.m. was 3.67 cm as estimated using so-called deviation maps. The maximum displacement was 7.92 cm. In addition, the orientation changes of each leaf within a day were analyzed. The maximum variation in the vertical angle was 69.6° from 12.30 to 6.00 p.m. In darkness, the displacements were smaller and showed a different orientation pattern. The canopy volume of plant 1 changed more in the morning (4.42 dm3) than in the afternoon (2.57 dm3). The results of plant 2 largely confirmed the results of the first plant and were added to check the robustness of the methodology. The results show how to quantify leaf orientation variation and leaf movements along a day at mm accuracy in different light conditions. This confirms the feasibility of the proposed methodology to robustly analyse leaf movements.
منابع مشابه
Testing the Suitability of a Terrestrial 2D LiDAR Scanner for Canopy Characterization of Greenhouse Tomato Crops
Canopy characterization is essential for pesticide dosage adjustment according to vegetation volume and density. It is especially important for fresh exportable vegetables like greenhouse tomatoes. These plants are thin and tall and are planted in pairs, which makes their characterization with electronic methods difficult. Therefore, the accuracy of the terrestrial 2D LiDAR sensor is evaluated ...
متن کاملRemediation of ozone pollution by ornamental plants in indoor environment
The indoor air quality is much more matter of concern as relative to ambient or outdoor air quality, especially in the context of human health. However, very few studies have been reported for remediation of indoor ozone by plant species. The main objective of this study is to evaluate ozone deposition velocities and ozone removal effectiveness of three indoor ornamental plant species (Dra...
متن کاملTerrestrial LiDAR in Urban Data Acquisition
Terrestrial LiDAR plays an essential role in the acquisition of complete three-dimensional data for urban modeling. Especially the growing demand for detailed façade models drives the developments in acquisition and processing of terrestrial data. This paper reviews the past efforts in terrestrial data acquisition, which were mainly image based methods and gives a overview of the current state-...
متن کاملTerrestrial LiDAR Capabilities for 3D Data Acquisition (Indoor and Outdoor) in the Context of Cadastral Modelling: A Comparative Analysis for Apartment Units
The paper presents a comparison of terrestrial LiDAR and Distancemeter for surveying 3D spatial data of property units (indoor and outdoor) and producing cadastral representations (2D and 3D). Two study sites representing apartment buildings (co-ownership units) were surveyed with both instruments and six criteria related to data acquisition steps (survey time, number of measures, number of ope...
متن کاملSimulated full-waveform LiDAR compared to Riegl VZ-400 terrestrial laser scans
A 3-D Monte Carlo ray-tracing simulation of LiDAR propagation models the reflection, transmission and absorption interactions of laser energy with materials in a simulated scene. In this presentation, a model scene consisting of a single Victorian Boxwood (Pittosporum undulatum) tree is generated by the high-fidelity tree voxel model VoxLAD using high-spatial resolution point cloud data from a ...
متن کامل