INFLUENCE OF HEAT TREATMENT AND K Ic/HRc RATIO ON THE DYNAMIC WEAR PROPERTIES OF COATED HIGH SPEED STEEL
نویسندگان
چکیده
M. Sedlaček, B. Podgornik, Institute of Metals and Technology, Ljubljana, Slovenia, D. Česnik, Hidria Rotomatika d.o.o, Spodnja Idrija, Slovenia The aim of this work was to determine the impact of various heat treatments on the KIc/HRc ratio and subsequently on the wear properties of coated high-speed steel under dynamic impact loading. The results showed that hardness and improvement in the fracture toughness have significant influence on the adhesion and impact wear properties of the coated high-speed steel.
منابع مشابه
Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel
Deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the final tempering treatment to enhance the wear resistance and hardness of the steels. In this study, the effects of the deep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studied using the wear testing machine and polarization and impeda...
متن کاملEffect of Thermochemical Treatment on The Structure, Hardness and Wear Behavior of Electrolss Ni-P Coated 4140 Steel
In the present stady, thermochemical treatment in H2/NH3 atmosphere was used as a post-treatment for electroless Ni-P coatings on the AISI 4140 steel substrates. High phosphorus (9%) coatings with thicknesses of 2, 24 and 48 m were applied and the effects of the thermochemical treatment on the morphology, structural changes, roughness, hardness and wear resistance of coatings were studied b...
متن کاملEffect of Thermochemical Treatment on The Structure, Hardness and Wear Behavior of Electrolss Ni-P Coated 4140 Steel
In the present stady, thermochemical treatment in H2/NH3 atmosphere was used as a post-treatment for electroless Ni-P coatings on the AISI 4140 steel substrates. High phosphorus (9%) coatings with thicknesses of 2, 24 and 48 m were applied and the effects of the thermochemical treatment on the morphology, structural changes, roughness, hardness 

and wear resistance of coatings were studi...
متن کاملThe effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel
Cryogenic treatment can be used as a supplemental treatment that is performed on some tool steels between quenching and tempering as an effective method for decreasing retained austenite and increasing wear resistance. In this research, the effect of deep cryogenic treatment (DCT) on dimensional stability and mechanical properties of 80CrMo12 5 tool steel was investigated. The martensitic trans...
متن کامل