Technical Note: The effect of sensor resolution on the number of cloud-free observations from space
نویسندگان
چکیده
Air quality and surface emission inversions are likely to be focal points for future satellite missions on atmospheric composition. Most important for these applications is sensitivity to the atmospheric composition in the lowest few kilometers of the troposphere. Reduced sensitivity by clouds needs to be minimized. In this study we have quantified the increase in number of useful footprints, i.e. footprints which are sufficient cloud-free, as a function of sensor resolution (footprint area). High resolution (1 km×1 km) MODIS TERRA cloud mask observations are aggregated to lower resolutions. Statistics for different thresholds on cloudiness are applied. For each month in 2004 four days of MODIS data are analyzed. Globally the fraction of cloudfree observations drops from 16% at 100 km2 resolution to only 3% at 10 000 km2 if not a single MODIS observation within a footprint is allowed to be cloudy. If up to 5% or 20% of a footprint is allowed to be cloudy, the fraction of cloudfree observations is 9% or 17%, respectively, at 10 000 km2 resolution. The probability of finding cloud-free observations for different sensor resolutions is also quantified as a function of geolocation and season, showing examples over Europe and northern South America (ITCZ).
منابع مشابه
Effect of sensor resolution on cloud-free observations
The effect of sensor resolution on the number of cloud-free observations from space J. M. Krijger, M. van Weele, I. Aben, and R. Frey SRON, Netherlands Institute for Space Research, Sorbonnelaan 2, 3584 CA Utrecht, The Netherlands KNMI, Royal Netherlands Meteorological Institute, De Bilt, The Netherlands Cooperative Institute for Meteorological Satellite Studies, University of Wisconsin-Madison...
متن کاملThe Effects of Potassium Promoter on the Syngas Conversion of Cobalt Catalysts (TECHNICAL NOTE)
The effects of potassium promoter for production of heavy hydrocarbons from syngas with silica- supported cobalt catalysts has been studied. After preparing the catalysts in accordance with the sol-gel method, they were subjected to various tests by using a small steely micro-reactor and capable of operating in diversified situations, such as stable temperature range, flow rate, space velocity,...
متن کاملConfidence Interval Estimation of the Mean of Stationary Stochastic Processes: a Comparison of Batch Means and Weighted Batch Means Approach (TECHNICAL NOTE)
Suppose that we have one run of n observations of a stochastic process by means of computer simulation and would like to construct a condifence interval for the steady-state mean of the process. Seeking for independent observations, so that the classical statistical methods could be applied, we can divide the n observations into k batches of length m (n= k.m) or alternatively, transform the cor...
متن کاملTwin Plate Weir: A Flow Measuring Device (TECHNICAL NOTE)
For efficient use of water, accurate measurement of flow in (field/laboratory) channels is required for many water resource projects. The present work is aimed to study the flow characteristics of a twin plate weir (two sharp-crested plates are placed one behind the other at some distance) under free and submerged flow conditions. Experiments are performed with four spacing of the twin plate we...
متن کاملOptimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE)
In this paper, the effect of number and fault current limiter(FCL) location has been investigated in order to have maximum reduction of short circuit current level in all buses in a real network. To do so, the faulty buses were identified in terms of short circuit current level by computing short circuits on the desired network. Then, while the fault current limit was modeled, its optimal locat...
متن کامل