Wave Propagation Characteristics on a Covered Conductor
نویسنده
چکیده
A wave propagation characteristic is very significant to investigate a transient voltage and insulation design of a cable. This paper carries out an experiment and a simulation of wave propagation characteristics on an insulation covered conductor in comparison with a bare conductor. The simulations are carried out using Electro Magnetic Transient Program (EMTP) and Finite Difference Time Domain (FDTD) method. The measured results and simulated results are compared for bare and covered conductors. It has been found that in the case of the covered conductor, the characteristics impedance in the simulation result is less by few percent from that of the bare conductor. The EMTP and FDTD simulations reasonably agree with the measured and theoretical results when the cell size and its number in the FDTD are appropriate.
منابع مشابه
Travelling-wave Modelling of Uniform Multi- Conductor Transmission Line Networks — Part I: Analytical Derivation
In Part I of this work, analysis of uniform multi-conductor transmission line networks is performed on travelling-wave basis, via “quasi-TEM” approach. Narrowband interpretation of the modal theory in the time domain and quantification of the multiple reflections effect are both included. Theoretical demonstration and analytical formulation are provided, along with guidelines towards computatio...
متن کاملComparing Wave Propagation Characteristics of Various Smart Electricity Distribution Networks
In Nordic countries, electricity distribution networks are consisted of underground cables or overhead insulated conductors or mix of both. However, each alternative has its own pros and cons. This chapter concentrates on determining the wave propagation characteristics of single-phase medium voltage (MV) cross-linked polyethylene (XLPE) cable and covered-conductor (CC) overhead electricity dis...
متن کاملکاربرد روش معادله سهموی در تحلیل مسائل انتشار امواج داخل ساختمان
With the rapid growth of indoor wireless communication systems, the need to accurately model radio wave propagation inside the building environments has increased. Many site-specific methods have been proposed for modeling indoor radio channels. Among these methods, the ray tracing algorithm and the finite-difference time domain (FDTD) method are the most popular ones. The ray tracing approach ...
متن کاملWave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis
Pipes are widely used in many industrial and mechanical applications and devices. Although there are many different constructions according to the specific application and device, these can show helical pattern, such as spiral pipes, wire-reinforced pipes/shells, spring-suspension, and so on. Theoretical modelling of wave propagation provides a prediction about the dynamic behavior, and it is f...
متن کاملWave Propagation in Sandwich Panel with Auxetic Core
Auxetic cellular solids in the forms of honeycombs and foams have great potential in a diverse range of applications, including as core material in curved sandwich panel composite components, radome applications, directional pass band filters, adaptive and deployable structures, filters and sieves, seat cushion material, energy absorption components, viscoelastic damping materials and fastening...
متن کامل