A Mini Unmanned Aerial Vehicle (uav): System Overview and Image Acquisition

In the last years UAV (Unmanned Aerial Vehicle)-systems became relevant for applications in precision farming and in infrastructure maintenance, like road maintenance and dam surveillance. This paper gives an overview about UAV (Unmanned Aerial Vehicle) systems and their application for photogrammetric recording and documentation of cultural heritage. First the historical development of UAV systems and the definition of UAV-helicopters will be given. The advantages of a photogrammetric system on-board a model helicopter will be briefly discussed and compared to standard aerial and terrestrial photogrammetry. UAVs are mostly low cost systems and flexible and therefore a suitable alternative solution compared to other mobile mapping systems. A mini UAV-system was used for photogrammetric image data acquisition near Palpa in Peru. A settlement from the 13 century AD, which was presumably used as a mine, was flown with a model helicopter. Based on the image data, an accurate 3D-model will be generated in the future. With an orthophoto and a DEM derived from aerial images in a scale of 1:7 000, a flight planning was build up. The determined flying positions were implemented in the flight control system. Thus, the helicopter is able to fly to predefined pathpoints automatically. Tests in Switzerland and the flights in Pinchango Alto showed that using the built-in GPS/INSand stabilization units of the flight control system, predefined positions could be reached exactly to acquire the images. The predicted strip crossings and flying height were kept accurately in the autonomous flying mode.