Novel uncooled detector based on gallium nitride micromechanical resonators

نویسندگان

  • Vikrant J. Gokhale
  • Yu Sui
  • Mina Rais-Zadeh
چکیده

This work presents measured results demonstrating an uncooled infrared (IR) detector based on gallium nitride (GaN) micromechanical resonators. GaN-based photonic detectors are typically designed to operate in the ultraviolet (UV) regime as the absorption spectrum of wide-band gap GaN peaks at a wavelength of ~360 nm. In contrast, the transduction mechanism of the device presented in this work is the pyroelectric perturbation of a GaN micromechanical resonator, allowing the detection of radiation in the IR regime. IR radiation within the absorption spectrum of the resonating stack material (mainly the IR absorber) is converted into heat causing pyroelectric charge release, which in turn shifts the resonant frequency via changes in the acoustic velocity of GaN. A thin-film IR absorber based on carbonnanotube nanocomposite is proposed, which offers IR absorptivity of more than 95%. As a proof of concept, we demonstrate a GaN resonant detector operated at 119 MHz, which exhibits an IR sensitivity of ~4 Hz/10nW.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Gallium nitride micromechanical resonators for IR detection

This paper reports on a novel technology for low-noise un-cooled detection of infrared (IR) radiation using a combination of piezoelectric, pyroelectric, electrostrictive, and resonant effects. The architecture consists of a parallel array of high-Q gallium nitride (GaN) micro-mechanical resonators coated with an IR absorbing nanocomposite. The nanocomposite absorber converts the IR energy into...

متن کامل

Sensitive Uncooled Ir Detectors Using Gallium Nitride Resonators and Silicon Nitride Absorbers

This paper presents the theory and measured results of a lownoise un-cooled infrared (IR) detector, which uses a combination of piezoelectric, pyroelectric, electrostrictive, and resonant effects to achieve high sensitivity. The sensor consists of a high-Q gallium nitride (GaN) micro-mechanical resonator coated with an IR absorber layer. The IR absorber converts the IR energy into heat. The gen...

متن کامل

AlGaN/GaN Micromechanical Devices and Resonant HEMTs

Piezoelectrically actuated micromechanical resonators have been a subject of extensive research for the past decade with the main goal of replacing quartz resonators in timing applications. Aluminum nitride (AlN) has been the main contender as a piezoelectric ceramic replacement for quartz since its low-temperature sputtering process has been developed. In recent years, gallium nitride (GaN) ha...

متن کامل

GaN Micromechanical Resonators with Meshed Metal Bottom Electrode

This work describes a novel architecture to realize high-performance gallium nitride (GaN) bulk acoustic wave (BAW) resonators. The method is based on the growth of a thick GaN layer on a metal electrode grid. The fabrication process starts with the growth of a thin GaN buffer layer on a Si (111) substrate. The GaN buffer layer is patterned and trenches are made and refilled with sputtered tung...

متن کامل

Piezoresistive versus Piezoelectric Transduction of GaN Micromechanical Resonators

Gallium nitride (GaN), in contrast to other commonly used piezoceramics, is a semiconductor that exhibits piezoresistive in addition to piezoelectric effects. The large piezoresponse – combined piezoelectric and piezoresistive effects – of GaN points out possible applications of GaN-based material systems in resonant devices. While the static piezoresistive response of GaN is small [1], the tim...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012