Assessment of femtosecond laser induced periodic surface structures on polymer films.

نویسندگان

  • Esther Rebollar
  • Javier R Vázquez de Aldana
  • Ignacio Martín-Fabiani
  • Margarita Hernández
  • Daniel R Rueda
  • Tiberio A Ezquerra
  • Concepción Domingo
  • Pablo Moreno
  • Marta Castillejo
چکیده

In this work we present the formation of laser induced periodic surface structures (LIPSS) on spin-coated thin films of several model aromatic polymers including poly(ethylene terephthalate), poly(trimethylene terephthalate) and poly carbonate bis-phenol A upon irradiation with femtosecond pulses of 795 and 265 nm at fluences well below the ablation threshold. LIPSS are formed with period lengths similar to the laser wavelength and parallel to the direction of the laser polarization vector. Formation of LIPSS upon IR irradiation at 795 nm, a wavelength at which the polymers absorb weakly, contrasts with the absence of LIPSS in this spectral range upon irradiation with nanosecond pulses. Real and reciprocal space characterization of LIPSS obtained by Atomic Force Microscopy (AFM) and Grazing Incidence Small Angle X-ray Scattering (GISAXS), respectively, yields well correlated morphological information. Comparison of experimental and simulated GISAXS patterns suggests that LIPSS can be suitably described considering a quasi-one-dimensional paracrystalline lattice and that irradiation parameters have an influence on the order of such a lattice. Fluorescence measurements, after laser irradiation, provide indirect information about dynamics and structure of the polymer at the molecular level. Our results indicate that the LIPSS are formed by interference of the incident and surface scattered waves. As a result of this process, heating of the polymer surface above its glass transition temperature takes place enabling LIPSS formation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Time resolved dynamics of rapid melting and resolidification of Sb thin films under ns and ps laser pulse irradiation

Related Articles Physical model for the laser induced forward transfer process Appl. Phys. Lett. 100, 071603 (2012) Layer dependent mechanical responses of graphene composites to near-infrared light Appl. Phys. Lett. 100, 073108 (2012) Ultraviolet and infrared femtosecond laser induced periodic surface structures on thin polymer films Appl. Phys. Lett. 100, 041106 (2012) Observation of stacking...

متن کامل

Anisotropic optical transmission of femtosecond laser induced periodic surface nanostructures on indium-tin-oxide films.

Two types of periodic nanostructures, self-organized nanodots and nanolines, were fabricated on the surfaces of indium-tin-oxide (ITO) films using femtosecond laser pulse irradiation. Multiple periodicities (approximately 800 nm and 400 nm) were clearly observed on the ITO films with nanodot and nanoline structures and were identified using two-dimensional Fourier transformation patterns. Both ...

متن کامل

Model of dissipative dielectric elastomers

Related Articles Dynamics of solvent-free grafted nanoparticles J. Chem. Phys. 136, 044902 (2012) Energy transfer and dynamics studies of photoluminescence of polythiophene derivative in blend thin films J. Appl. Phys. 111, 023512 (2012) Note: Percolation in two-dimensional flexible chains systems J. Chem. Phys. 136, 046101 (2012) Ultraviolet and infrared femtosecond laser induced periodic surf...

متن کامل

Femtosecond laser induced surface nanostructures on copper

This study demonstrated circular surface nanostructures and femtosecond laser-induced periodic surface structures (FLIPSS) for copper produced by a Ti:Sapphire femtosecond laser beam of wavelength 800 nm and duration 120 fs. The circular textured nanostrucres could be created by a single laser pulse. The nanostructures in the center of the heated spot diminish as laser fluence increases and a c...

متن کامل

Reduction of Friction of Metals Using Laser-Induced Periodic Surface Nanostructures

We report on the effect of femtosecond-laser-induced periodic surface structures (LIPSS) on the tribological properties of stainless steel. Uniform periodic nanostructures were produced on AISI 304L (American Iron and Steel Institute steel grade) steel surfaces using an 800-nm femtosecond laser. The spatial periods of LIPSS measured by field emission scanning electron microscopy ranged from 530...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical chemistry chemical physics : PCCP

دوره 15 27  شماره 

صفحات  -

تاریخ انتشار 2013