Fully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging
نویسندگان
چکیده
Integration of sensing capabilities with an interactive signage through wireless communication is enabling the development of smart packaging wherein wireless (13.56 MHz) power transmission is used to interlock the smart packaging with a wireless (13.56 MHz) reader or a smart phone. Assembly of the necessary componentry for smart packaging on plastic or paper foils is limited by the manufacturing costs involved with Si based technologies. Here, the issue of manufacturing cost for smart packaging has been obviated by materials that allow R2R (roll-to-roll) gravure in combination with R2R coating processes to be employed. R2R gravure was used to print the wireless power transmission device, called rectenna (antenna, diode and capacitor), and humidity sensor on poly(ethylene terephtalate) (PET) films while electrochromic signage units were fabricated by R2R coating. The signage units were laminated with the R2R gravure printed rectenna and sensor to complete the prototype smart packaging.
منابع مشابه
Fully printed flexible and disposable wireless cyclic voltammetry tag
A disposable cyclic voltammetry (CV) tag is printed on a plastic film by integrating wireless power transmitter, polarized triangle wave generator, electrochemical cell and signage through a scalable gravure printing method. By proximity of 13.56 MHz RF reader, the printed CV tag generates 320 mHz of triangular sweep wave from +500 mV to -500 mV which enable to scan a printed electrochemical ce...
متن کاملA fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
Roll-to-roll (R2R) printing has been pursued as a commercially viable high-throughput technology to manufacture flexible, disposable, and inexpensive printed electronic devices. However, in recent years, pessimism has prevailed because of the barriers faced when attempting to fabricate and integrate thin film transistors (TFTs) using an R2R printing method. In this paper, we report 20 × 20 acti...
متن کاملScalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system
To demonstrate that roll-to-roll (R2R) gravure printing is a suitable advanced manufacturing method for flexible thin film transistor (TFT)-based electronic circuits, three different nanomaterial-based inks (silver nanoparticles, BaTiO3 nanoparticles and single-walled carbon nanotubes (SWNTs)) were selected and optimized to enable the realization of fully printed SWNT-based TFTs (SWNT-TFTs) on ...
متن کاملLarge-area compliant tactile sensors using printed carbon nanotube active-matrix backplanes.
A 20 × 20 pixel pressure sensor array based on a printed active-matrix single-wall carbon-nanotube thin-film transistor backplane is presented. Using a gravure printing process that is compatible with fully printed large-area roll-to-roll processing, a 97% device yield is obtained on the 400-transistor backplane. As a proof of concept, pressure sensors are integrated to map the applied tactile ...
متن کاملPlasma Characteristics Using Superimposed Dual Frequency Inductively Coupled Plasma Source for Next Generation Device Processing.
U-shaped inductively coupled plasma (ICP) source was investigated as a linear plasma source for the next generation roll-to-toll flexible display processing. For the radio frequency power to the source, the dual frequency composed of 13.56 MHz and 2 MHz was used and the effect of dual frequency to the U-shaped ICP source on the plasma density, electron temperature, and plasma uniformity was inv...
متن کامل