Microstructure and Mechanical Properties of Crofer 22 Apu Ferritic Stainless Steel Badania Mikrostruktury I Właściwości Mechanicznych Stali Ferrytycznej Crofer 22 Apu
نویسنده
چکیده
The objective of this work was to expand the knowledge on mechanical properties of the oxidized Crofer 22 APU Ferritic Stainless Steel. To examine adhesion of oxide scale formed on steel the scratch test was performed. Scratch test as an appropriate method for qualitative evaluation of the film adhesion to substrate has been used in many studies. Scratch properties were investigated before and after oxidation at 800◦C for 500 hours in laboratory air.
منابع مشابه
Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating
Crofer 22 APU ferritic stainless steel has been evaluated as one of the favorable materials for utilization in Solid oxide fule cell (SOFC) interconnects. However, there are difficulties in utilizing these metallic interconnects, including the quick decrease of their electrical conductivity and evaporation of Cr species. To overcome the above problems, the application of protective coatings ha...
متن کاملArtificial Intelligence in the AHSS Steel Mechanical Properties and Microstructure Analysis
The assessment of results method of calculation tensile strength and yield strength of this cold rolled steels using the artificial neural networks in modelling relationship of elements composition (chromium, manganese, silicon, carbon), thermal treatment and properties of HCT600X, HCT780X, HCT980X steels was proposed. Was made further research using the new element chromium. Streszczenie. W ar...
متن کاملCompositional effect of Cr contamination susceptibility of La9.83Si6−x−yAlxFeyO26±δ apatite-type SOFC electrolytes in contact with CROFER 22 APU
Laboratory of Chemistry and Materials Engineering, School of Technological A Institute of Sterea Ellada, GR 34400, Psac gr; [email protected] School of Chemical Engineering, Nationa Athens, Greece Materials Industrial Research & Technolog National Road, P.O. Box 18646, GR 34100 Institut für Energieforschung und Physikalis Technology, Robert-Koch-Str. 42, 38678 Cla Clausthaler Zentrum für Material...
متن کاملInvestigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications
One of the most effective ways to improve oxidation resistance of interconnects used in solid oxide fuel cells (SOFCs) is to apply a layer of conductive protective coating. In this study, Crofer 22APU ferritic steel was coated in a titanium- based powder mixture by pack cementation method. The powder composition for titanium coating was Ti 20 wt.%, NH4Cl 5 wt.% (activator) and Al2O3 75 wt.%. Th...
متن کاملThe Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel
In the present research, the effect of the homogenization process and annealing temperature were investigated for the 1.4470 ferritic-austenitic stainless steel in the as-cast condition. In this regard, microstructural evolutions, hardness, and impact energy of the steel was evaluated with different heat treatment conditions. The results show that the minimum volume fraction of austenite phase ...
متن کامل