Elemental Analysis of Palladium Electrodes after Pd/pd Light Water Critical Electrolysis
نویسندگان
چکیده
Elemental analyses of palladium electrodes were conducted after a new type of light water electrolysis at the optimum condition and system to induce nuclear reaction, that is referred to as Pd/Pd light water critical electrolysis. At the same time the conjecture of nuclear transmutation process becomes easier through this experiment, because detected elements are strictly restricted within the alternative of impurities or transmutation products. We consider that elements detected from cathode palladium only, namely iron, titanium, chromium, and so on, are transmutation products. Furthermore countless Ohmori-type palladium craters were observed for the first time as an indirect evidence of nuclear reactions occurred at the electrode surface.
منابع مشابه
Iron Formation in Gold and Palladium Cathodes
Investigation of some reaction products possibly produced by electrolyzing with Au and Pd electrodes in Na2SO4, K2CO3, and KOH light water solutions was made. The electrolysis was performed for 7 days with a constant current of 1 A. After the electrolysis the elements accumulated in the electrode were analyzed by means of AES. In every case a notable amount of Fe atoms were detected together wi...
متن کاملMicroanalysis of Palladium after Electrolysis in Heavy Water
The morphology and microcomposition of palladium after electrolysis in heavy water were studied. Fibers which appeared on the surface were observed to change with time. Evidence which supports the possibility of transmutation is presented. INTRODUCTION Previously we reported finding concentrations of unexpected elements on palladium cathodes after electrolysis in an electrolyte containing H2SO4...
متن کاملObservations of Strong Resistivity Reduction in a Palladium Thin Long Wire Using Ultra—High Frequency Pulsed Electrolysis at D/Pd>1*
We performed a ultra—short width high voltage pulse electrolysis using a thin Pd wire cathode; a diluted electrolytic solution of D2O+LiOD was used in a peculiar wire—turned electrodes geometry. The deuterated Pd loading was evaluated by the D/Pd normalised electric resistance curve (R/Ro). After a long time of electrolysis a very high D/Pd loading (1:1 or more) was reached. Very low R/Ro (< 0....
متن کاملExperimental Confirmation of the Nuclear Reaction at Low Energy Caused by Electrolysis in the Electrolyte
Many elements on Pd electrodes were confirmed by several analytic methods; reaction products with the mass number up to 208 are deposited on palladium cathodes, which were subjected to electrolysis in a heavy water solution at high pressure, temperature, and current density for prolonged time. These masses were composed of many elements ranging from hydrogen to lead. Extraordinary changes of th...
متن کاملDesign of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols
We explore electro-catalytic properties of a system consisting of platinum and palladium nanoparticles dispersed over a nanotubular self-organized TiO2 matrix. These electrodes prepared by electroess and microemulsion of palladium and palladium nanoparticles on to TiO2 nanotubes, respectively. Titanium oxide nanotubes were fabricated by anodizing titanium foil in ethylene glycol (EG) fluoride-c...
متن کامل