Characterization of Etched Glass Surfaces by Wave Scattering
نویسندگان
چکیده
The roughness of glass surfaces after different stages of etching is investigated by reflection measurements with a spectrophotometer, light scattering, and atomic-force microscopy (in small scale), and Talysurf (in large scale). The results suggest, there are three regimes during etching, according to their optical reflectivity and roughness. The first and second regimes are studied by the Kirchhoff theory and the third one is studied by the geometric theory. Also, we compare the roughness obtained by the optical scattering to the AFM results.
منابع مشابه
CHARACTERIZATION OF MICRO/NANO POROUS HOLLOW GLASS MICROSPHERES FABRICATED THROUGH VARIOUS CHEMICAL ETCHING PROCESSE FOR USE IN SMART COATINGS
Porous hollow glass microspheres have many uses, including encapsulation of active materials. In this paper a fast and facile method for fabricating porous hollow glass-microspheres was demonstrated by etching them using dilute hydrofluoric acid. Then, a highly reactive amine was infiltrated into the etched glass microspheres. Scanning electron microscopy was conducted for the hollow glass micr...
متن کاملCoherent anti-Stokes Raman scattering microscopy for quantitative characterization of mixing and flow in microfluidics.
We present an optical, noninvasive and label-free approach to characterize flow profiles in microfluidic devices. Coherent anti-Stokes Raman scattering signals were used to map the mass transport in a microfluidic device that was then related back to the local flow rate of dilute solutes having constant fluid properties. Flow characterization was demonstrated in two common types of microfluidic...
متن کاملProcessing and Characterization of Nanocrystalline Mica Glass-Ceramics
In order to fabrication of transparent glass-ceramics with Li-mica nano crystals, the glasses with chemical composition of 94.9 mass% Li(1+x)Mg3AlSi3(1+x)F2 (x=0.5) with 5.1 mass% MgF2 were crystallized. The glasses were fabricated via the conventional melt-quenching technique. Mica crystals were precipitated in the glass phase by later heat treatment. Glass samples had glass transition tempera...
متن کاملExtreme wettability of nanostructured glass fabricated by non-lithographic, anisotropic etching
Functional glass surfaces with the properties of superhydrophobicity/or superhydrohydrophilicity, anti-condensation or low reflectance require nano- or micro-scale roughness, which is difficult to fabricate directly on glass surfaces. Here, we report a novel non-lithographic method for the fabrication of nanostructures on glass; this method introduces a sacrificial SiO2 layer for anisotropic pl...
متن کاملSea Surfaces Scattering by Multi-Order Small-Slope Approximation: a Monte-Carlo and Analytical Comparison
L-band electromagnetic scattering from two-dimensional random rough sea surfaces are calculated by first- and second-order Small-Slope Approximation (SSA1, 2) methods. Both analytical and numerical computations are utilized to calculate incoherent normalized radar cross-section (NRCS) in mono- and bi-static cases. For evaluating inverse Fourier transform, inverse fast Fourier transform (IFFT) i...
متن کامل