A psychoacoustical investigation into the effect of wall material on the sound produced by lip-reed instruments
نویسنده
چکیده
The most likely way that the wall material might affect the sound produced is through its influence on the structural vibrations of the instrument. Recent experiments by Whitehouse et al have shown that blowing a lip-reed instrument excites vibrations in the instrument walls, primarily due to the motion of the oscillating lips against the mouthpiece [5, 6]. The amplitude of these vibrations depends on the material from which the instrument is made. However, the wall vibration amplitudes are small and it is unclear whether they have a perceptible effect on the sound produced by the instrument’s air column.
منابع مشابه
The Effect of Wall Material on the Structural Vibrations Excited When Lip-reed Instruments Are Blown
The shape of the air column is the dominant factor in determining the playing characteristics of a lipreed instrument. The material from which the instrument is manufactured is generally considered by acousticians to be of minor importance. However, this view is not universally held. Instrument makers have claimed that they are able to distinguish between the musical qualities of instruments ma...
متن کاملAnalytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L
One of the bellows producing method is hydroforming process .Whereas some factor of hydroforming process specially internal pressure affects on final characteristics produced bellows such as bursting, wrinkling and wall thickness distribution. In this paper the effect of internal pressure factor in final quality of produced bellows will be investigated. In simulation of process, ABAQUS/Explicit...
متن کاملAnalytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L
One of the bellows producing method is hydroforming process .Whereas some factor of hydroforming process specially internal pressure affects on final characteristics produced bellows such as bursting, wrinkling and wall thickness distribution. In this paper the effect of internal pressure factor in final quality of produced bellows will be investigated. In simulation of process, ABAQUS/Explicit...
متن کاملInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملInvestigation of the effect of electrolyte on acoustical behaviour of ceramic coatings produced by method Plasma Electrolytic Oxidation (PEO) on titanium
In this paper, titanium oxide coating (TiO2) was produced on titanium alloy Ti6Al4V by Plasma Electrolytic Oxidation (PEO) Method. Sodium Silicate (Na2SiO3) and Sodium Aluminate (NaAlO2) based electrolytes were selected in PEO process. The effects of concentration of Sodium Aluminate (0, 2.5, 5, 7.5, and 10 g/L) on the microstructure and acoustical behaviour of the formed coatings were studied....
متن کامل