Microporous carbon coated silicon core/shell nanocomposite via in situ polymerization for advanced Li-ion battery anode material.
نویسندگان
چکیده
A microporous carbon coated core/shell Si@C nanocomposite prepared by in situ polymerization exhibits a stable capacity of over 1200 mAh g(-1) with 95.6% retention even after 40 cycles, which makes it a promising anode material for lithium ion batteries.
منابع مشابه
Carbon-silicon core-shell nanowires as high capacity electrode for lithium ion batteries.
We introduce a novel design of carbon-silicon core-shell nanowires for high power and long life lithium battery electrodes. Amorphous silicon was coated onto carbon nanofibers to form a core-shell structure and the resulted core-shell nanowires showed great performance as anode material. Since carbon has a much smaller capacity compared to silicon, the carbon core experiences less structural st...
متن کاملSimulation of the Impact of Si Shell Thickness on the Performance of Si-Coated Vertically Aligned Carbon Nanofiber as Li-Ion Battery Anode
Micro- and nano-structured electrodes have the potential to improve the performance of Li-ion batteries by increasing the surface area of the electrode and reducing the diffusion distance required by the charged carriers. We report the numerical simulation of Lithium-ion batteries with the anode made of core-shell heterostructures of silicon-coated carbon nanofibers. We show that the energy cap...
متن کاملHighly conductive, mechanically robust, and electrochemically inactive TiC/C nanofiber scaffold for high-performance silicon anode batteries.
Silicon has a high specific capacity of 4200 mAh/g as lithium-ion battery anodes, but its rapid capacity fading due to >300% volume expansion and pulverization presents a significant challenge for practical applications. Here we report a core-shell TiC/C/Si inactive/active nanocomposite for Si anodes demonstrating high specific capacity and excellent electrochemical cycling. The amorphous silic...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملCore–shell structured hollow SnO2–polypyrrole nanocomposite anodes with enhanced cyclic performance for lithium-ion batteries
0.1016/j.nanoen.2 lsevier Ltd. All rig thors. : [email protected] Abstract Core–shell structured hollow SnO2–polypyrrole (PPy) nanocomposites (SnO2@PPy) with excellent electrochemical performance were synthesized using a hydrothermal method followed by an in situ chemical-polymerization route. The thickness of the polymerized amorphous PPy coating covering on the hollow SnO2 microspheres is abou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical chemistry chemical physics : PCCP
دوره 11 47 شماره
صفحات -
تاریخ انتشار 2009