The Acceleration/Deceleration Control Algorithm Based on Trapezoid-Curve Jerk in CNC Machining
نویسندگان
چکیده
In this study, we put forward an Acc/Dec control algorithm based on trapezoid-curve jerk in order to avoid step change in jerk curve. Moreover, the motion profile smooth control approach based on continuous jerk is developed in details to decrease machine tools impact according to various kinematics constraint conditions, such as the maximum acceleration, the maximum jerk, the machining program segment displacement, the instruction feed rate and so on; Finally, the developed Acc/Dec approach and the traditional linear Acc/Dec approach are compared in the CNC experimental table. The results reveal that the developed approach can achieve more smooth and flexible motion profile, which is helpful to minish machine tools impact and enhance parts machining surface quality.
منابع مشابه
Look-Ahead Linear Jerk Filter For A Computerized Numerical Control
In high-speed precision machining systems, reference trajectory generation with smooth kinetic profiles plays a key role in the computerized numerical control (CNC). In this paper, look-ahead linear jerk filter algorithm is proposed to ensure smooth and accurate motion with a linear jerk change. The look-ahead algorithm detected the step-changing points of the speed curve. At each step-changing...
متن کاملThe feedrate scheduling of NURBS interpolator for CNC machine tools
This paper proposes an off-line feedrate scheduling method of CNC machines constrained by chord tolerance, acceleration and jerk limitations. The off-line process for curve scanning and feedrate scheduling is realized as a pre-processor, which releases the computational burden in real-time task. The proposed method first scans a non-uniform rational B-spline (NURBS) curve and finds out the cruc...
متن کاملFeed optimization for five-axis CNC machine tools with drive constraints
Real time control of five-axis machine tools requires smooth generation of feed, acceleration and jerk in CNC systems without violating the physical limits of the drives. This paper presents a feed scheduling algorithm for CNC systems to minimize the machining time for five-axis contour machining of sculptured surfaces. The variation of the feed along the five-axis tool-path is expressed in a c...
متن کاملCnc Interpolators: Algorithms and Analysis
CAD systems today interpolate general curves by dividing each curve into many straight-line segments which are downloaded to the CNC. Determining the number of lines to be transferred from the CAD to the CNC poses a conflict between the desired precision of the part and the feedrate fidelity. The current method results in severe variations in the feedrate, leading, in turn, to variations in the...
متن کاملTime-Optimal Interpolation for Five-axis CNC Machining along Parametric Tool Path based on Linear Programming
Abstract. In this paper, the time-optimal velocity planning problem for five axis CNC machining along a given parametric tool path under chord error, acceleration, and jerk constraints is studied. The velocity planning problem under confined chord error and acceleration is reduced to an equivalent linear programming problem by discretizing the tool path and other quantities. As a consequence, a...
متن کامل