Rapid Prototyping in Biomedical Engineering
نویسندگان
چکیده
منابع مشابه
Rapid prototyping for biomedical engineering: current capabilities and challenges.
A new set of manufacturing technologies has emerged in the past decades to address market requirements in a customized way and to provide support for research tasks that require prototypes. These new techniques and technologies are usually referred to as rapid prototyping and manufacturing technologies, and they allow prototypes to be produced in a wide range of materials with remarkable precis...
متن کاملMethod for Constructing Rapid Prototyping from MR Data
C. ARRIETA, S. URIBE, C. SING-LONG, J. RAMOS, A. VARGAS, P. IRARRAZAVAL, AND C. TEJOS DEPARTMENT OF ELECTRICAL ENGINEERING, PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE, SANTIAGO, CHILE, BIOMEDICAL IMAGING CENTER, PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE, SANTIAGO, CHILE, DEPARTMENT OF RADIOLOGY, PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE, SANTIAGO, CHILE, DEPARTMENT OF MECHANICAL ENGINEERING, PONTIF...
متن کاملHeterogeneous Object Modeling for Rapid Prototyping
A heterogeneous object is referred to a solid component consisting of two or more material primitives distributed continuously or discontinuously within an object. Modeling and manufacturing of heterogeneous object (HO) have been paid much attention recently as the advent of rapid prototyping manufacturing technology, which makes it possible to fabricate the heterogeneous object. As the continu...
متن کاملThe design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques.
Tissue engineering (TE) is an important emerging area in biomedical engineering for creating biological alternatives for harvested tissues, implants, and prostheses. In TE, a highly porous artificial extracellular matrix or scaffold is required to accommodate mammalian cells and guide their growth and tissue regeneration in three-dimension (3D). However, existing 3D scaffolds for TE proved less...
متن کاملApplication of the Extreme Learning Machine for Modeling the Bead Geometry in Gas Metal Arc Welding Process
Rapid prototyping (RP) methods are used for production easily and quickly of a scale model of a physical part or assembly. Gas metal arc welding (GMAW) is a widespread process used for rapid prototyping of metallic parts. In this process, in order to obtain a desired welding geometry, it is very important to predict the weld bead geometry based on the input process parameters, which are voltage...
متن کامل