Simulation of Photopolymer CT Specimen for Stress Intensity Factors
نویسنده
چکیده
Now a days product development using prototype methods for actual usage is a growing concept in engineering. Present work deals with simulation of Compact Tension specimen to get fracture parameters J – integral and Stress intensity factors of product built by polyjet technology 3D printer additive manufacturing system. FEA simulation is carried out with the help of Abaqus software by simulating actual testing procedure by applying a tensile load on one of the pins to have mode I fracture. Fracture parameters J – integral and stress intensity factors are requested as history output. A comparison is made between the values of stress intensity factor obtained by simulation and by calculation using ASTM standard. It is observed that the values of stress intensity factor obtained by simulating the specimen in FEA software Abaqus/CAE are near to the values obtained by calculations. Keywords— stress intensity factor, polyjet technology, photopolymer, 3D printer, additive manufacturing.
منابع مشابه
Effect of Boundary Condition on Pre-Existing Crack Under Fatigue Loading
In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...
متن کاملA Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...
متن کاملA two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis
Finite element method (FEM) is one of the most famous methods which has many applications in varies studies such as the study of crack propagation in engineering structures. However, unless extremely fine meshes are employed, problem arises in accurately modelling the singular stress field in the singular element area around the crack tip. In the present study, the crack growth simulation has b...
متن کاملExtended finite element simulation of crack propagation in cracked Brazilian disc
The cracked Brazilian disc (CBD) specimen is widely used in order to determine mode-I/II and mixed-mode fracture toughness of a rock medium. In this study, the stress intensity factor (SIF) on the crack-tip in this specimen is calculated for various geometrical crack conditions using the extended-finite element method (X-FEM). This method is based upon the finite element method (FEM). In this m...
متن کاملPhotoelastic Determination of Mixed Mode Stress Intensity Factors
A two dimensional finite model with inclined crack at different crack angles are being analyzed in mixed mode condition using photo elasticity method for the determination of Stress Intensity Factors. The well-known Sih’s equation and three points deterministic approach is used for the determination of stress intensity factors. The effects of biaxial load factor, crack angle, size factors were ...
متن کامل