Effects of calcination temperature on the pore size and wall crystalline structure of mesoporous alumina.

نویسندگان

  • Zhong-Xi Sun
  • Ting-Ting Zheng
  • Qi-Bing Bo
  • Miao Du
  • Willis Forsling
چکیده

In this paper, mesoporous alumina with different pore sizes and wall crystalline structures was synthesized at calcination temperatures over 550 degrees C. The characterization of the samples calcined at 550, 800, 1100, and 1300 degrees C, respectively, was performed using TEM, XRD, FTIR, TG/DTA, and N2 adsorption/desorption techniques. The correlation between pore size and wall crystalline structure on calcination temperature was systematically investigated.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structural and Morphological Features of Disperse Alumina Synthesized Using Aluminum Nitrate Nonahydrate

Transformation of Al(NO3)3∙9H2O (upon heating in the range of 20-1200 °C) into blends of amorphous and crystalline boehmite (210-525 °C), amorphous alumina and crystalline γ-Al2O3 (850 °C), and crystalline α-Al2O3 (1100 °C) was analyzed using X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), infrared (IR) spectroscopy, thermogravimetry, and low-temperature nitro...

متن کامل

Synthesis and Charaterization of Magensium Oxide Mesoporous Microstructures Using Pluronic F127

Mesoporous  MgO  microstructures  were  synthesized  using magnesium  acetate  tetrahydrate,  ammonium  oxalate  monohydrate and  Pluronic  F127  via  heating  at  40  °C  for  24  h  and  subsequent calcination. The mesoporous structure of magnesium oxide with the specific  surface  area  of  47m2 /g,  pore  volume  0.30  cm3 /g  and  the average pore size 24 nm is produced. According to ...

متن کامل

Influence of synthesis parameters on the properties of nanostructured γ-Alumina using plackett-burman experimental design

Mesoporous nanostructured γ-Al2O3 powders were synthesized through multi- step precipitation procedures using the pH-swing technique. Structural and morphological characteristics in addition to the thermal behavior of the procured samples were characterized via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared (FT-IR) ...

متن کامل

Influence of synthesis parameters on the properties of nanostructured γ-Alumina using plackett-burman experimental design

Mesoporous nanostructured γ-Al2O3 powders were synthesized through multi- step precipitation procedures using the pH-swing technique. Structural and morphological characteristics in addition to the thermal behavior of the procured samples were characterized via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared (FT-IR) ...

متن کامل

Development of Spin Coated Mesoporous Oxide Films for MEMS Structures

Mesoporous materials offer several unique properties when incorporated in microelectromechanical systems (MEMS) including low density, thermal insulation and the ability to carry out rapid etching. This paper describes the development of two mesoporous thin film materials for MEMS structures, an organically modified silicate and crystalline TiO2. The morphologies of the mesoporous thin films ar...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of colloid and interface science

دوره 319 1  شماره 

صفحات  -

تاریخ انتشار 2008