A software defined radio platform with direct conversion: SOPRANO

نویسندگان

  • Shinichiro Haruyama
  • Robert Morelos-Zaragoza
چکیده

ilktract-In this paper, a new software defined radio plat-forim with multiport-based direct conversion is proposed, named SOPRANO (Software Programmable and Hardware Eeconfigurable Architecture for Eetwgrk). The main features of SOPRANO are a high-level design methodology for digital circuits, a new mixer-less direct conversion method, and software algorithms for multi-band and multi-mode operation. We built the first prototype SOPRANO 1.0, which wa13 able to receive PSK and QAM signals with two different carrier frequencies at 2.45GHz and 5.25GHz by changing signal processing software.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Software Radio Receiver with Direct Conversion and Its Digital Processing

This paper discusses a design methodology suitable for the development of software de ned radio platforms. A exible digital receiver was designed and implemented using a multi-port direct converter and an FPGA-based platform. The design starts with a hardware-oriented top-level system model. The model is built based on basic signal processing blocks connected together in a graphical tool. Carri...

متن کامل

Research and development on cognitive and software radio technologies - Devices and hardware platform -

Currently, a number of wireless access systems have been available to users. Especially, several new systems can be used on not only 800-6000MHz band that is suitable for cellular communications and broadband wireless access systems but also the lower frequency band such as VHF and UHF bands. This means that most frequency bands adequate for mobile communication systems are fully occupied after...

متن کامل

Development of MIMO-SDR Platform and Its Application to Real-Time Channel Measurements

A multiple-input multiple-output software defined radio (MIMO-SDR) platform was developed for implementation of MIMO transmission and propagation measurement systems. This platform consists of multiple functional boards for baseband (BB) digital signal processing and frequency conversion of 5 GHz-band radio frequency (RF) signals. The BB boards have capability of arbitrary system implementation...

متن کامل

Broadband digital direct down conversion receiver suitable for software defined radio

While a significant amount of work has been carried out on digital receivers to support flexible and adaptive high data rate processing for multiple systems, small interest has been shown on the RF part and especially the advantages of using a broadband RF front end. This paper presents a challenge raised in the design of a single flexible multimode and multiband RF receiver. It proposes a new ...

متن کامل

HYRA: A Software-defined Radio Architecture for Wireless Embedded Systems

Traditional Software-defined Radio (SDR) architectures cannot go with the requirements of embedded systems, specially in terms of performance and power consumption. Lowpower FPGAs now reaching the market might soon become a viable alternative to overcome such limitations. The Hybrid Radio Architecture (HYRA) introduced in this paper contributes to this scenario as it explores the Hybrid HW/SW C...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001