Laser heating of a sintered oxide superconductor
نویسندگان
چکیده
Raman spectroscopy, in which a laser beam serves the dual role of exciting the Raman spectrum and annealing the sample, shows promise as a means of investigating oxygen effects in the oxide superconductors. A technique is described, based on measurements of the ratios of the areas of corresponding peaks in the antiStokes and Stokes spectra, whereby the temperature of the illuminated region of the sample can be determined as a function of the power in the incident laser beam. It is found that, for sintered samples of bismuth 2122, a small correction must be made for the departure from thermodynamic equilibrium induced by the pumping effect of the laser beam.
منابع مشابه
Synthesis of Barium-zinc-titanate Ceramics
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered at 1250 °C for 2h with a heating rate of 10 °C/min. X-ray diffraction analysis of obtained powders and sintered samples was performed in order to investigate changes of the pha...
متن کاملSintering Mechanisms and Mechanical Properties of 3D Printed Metals
Nickel and iron based alloys are widely used as raw materials in 3D printing or additive manufacturing process. In direct metal laser sintering (DMLS) process, a primary 3D printing technique for metals, metallic powders are sintered to a desired shape by heat energy from a laser beam. This study presents a molecular dynamics study to simulate the sintering process and resultant mechanical prop...
متن کاملPhase purity and the thermoelectric properties of Ge2Sb2Te5 films down to 25nm thickness
Related Articles Laser-sintered thin films of doped SiGe nanoparticles Appl. Phys. Lett. 100, 231907 (2012) Light-induced off-diagonal thermoelectric effect via indirect optical heating of incline-oriented CaxCoO2 thin film Appl. Phys. Lett. 100, 181907 (2012) Thermal artifact on the spin Seebeck effect in metallic thin films deposited on MgO substrates J. Appl. Phys. 111, 07B106 (2012) Evoluti...
متن کاملThe effect of sintering parameters on the microstructure and dielectric properties of bismuth titanate
In the present work, the effect of sintering parameters including sintering temperature, soaking time, and heating rate on densification, microstructure, and dielectrical properties of bismuth titanate (Bi4Ti3O12) ceramics were investigated. Bismuth titanate was synthesized by the solid state method and titanium oxide and bismuth oxide used as raw materials. X-ray diffraction (XRD) indicated, p...
متن کاملEffect of Microwave Radiation on the Properties of Sintered Oxide Ceramics
Recent research has been significantly increased our fundamental understanding of microwave interactions with materials. Thermal absorption has been demonstrated to result from simultaneous action of multiple dissipation mechanisms during processing. In addition, it has been conclusively established that strong microwave fields exert a non-thermal driving force during sintering. This force acts...
متن کامل