Design of a Kalman Filter for a Cutting Force Measurement System
نویسندگان
چکیده
This paper presents a Kalman filter designed for a cutting force measurement system. The cutting force measurement system is used to measure cutting forces for meso-milling applications. Due to the small magnitude of the cutting forces generated from the meso-milling process, the measurement results are easily distorted by the noise that exists in the measurement system. The object of the Kalman filter design is to reduce the noise influence and obtain accurate cutting force measurement information for the meso-milling applications. The Kalman filter is designed based on an oscillation process model due to the oscillation characteristic of the cutting forces experienced in the meso-milling process.
منابع مشابه
Design of a Kalman Filter for a Cutting Force Measurement System
This paper presents a Kalman filter designed for a cutting force measurement system. The cutting force measurement system is used to measure cutting forces for meso-milling applications. Due to the small magnitude of the cutting forces generated from the meso-milling process, the measurement results are easily distorted by the noise that exists in the measurement system. The object of the Kalma...
متن کاملDoppler and bearing tracking using fuzzy adaptive unscented Kalman filter
The topic of Doppler and Bearing Tracking (DBT) problem is to achieve a target trajectory using the Doppler and Bearing measurements. The difficulty of DBT problem comes from the nonlinearity terms exposed in the measurement equations. Several techniques were studied to deal with this topic, such as the unscented Kalman filter. Nevertheless, the performance of the filter depends directly on the...
متن کاملDesign and Implementation of a Kalman Filter-Based Time-Varying Harmonics Analyzer
Nowadays with increasing use of numerous nonlinear loads, voltage and current harmonics in power systems are one of the most important problems power engineers encounter. Many of these nonlinear loads, because of their dynamic natures, inject time-varying harmonics into power system. Common techniques applied for harmonics measurement and assessment such as FFT have significant errors in presen...
متن کاملکاهش تعداد ماهوارهها در یک سیستم ناوبری ترکیبی GPS/INS با استفاده از فیلتر ذرهای
The estimation of situation in a combinational navigation GPS/INS with least number of satellites is the main purpose of this paper. As inertial measurement unit uses altimeter for height measurement, we can assume which height poses certain amounts, whereas geographical length and width are unknown to us in this paper. The single difference GPS is employed for updating the inertial navigation ...
متن کاملDesign and Experimental Evaluation of integrated orientation estimation algorithm Autonomous Underwater Vehicle Based on Indirect Complementary Filter
This paper aims is to design an integrated navigation system constituted by low-cost inertial sensors to estimate the orientation of an Autonomous Underwater Vehicle (AUV) during all phases of under water and surface missions. The proposed approach relied on global positioning system, inertial measurement unit (accelerometer & rate gyro), magnetometer and complementary filter technique. Complem...
متن کامل