Use of digital photographs for artificial tooth selection.

Digital photography has become available to everybody. The aim of this study was to examine possibility of calculating the width of a missing central incisor using digital photographs. Digital photographs were obtained from 51 dentate subjects using a 3.1 Megapixel digital camera from various distances: 35 cm, 70 cm, 1 m and 1.5 m. For the calculation of the width of maxillary left central incisor (MLI), the following equation was used: MLI(calculated) = Photographic width of MLI x IPD / photographic IPD. Statistical analysis was made (Kolmogorov-Smirnov test, dependent sample t-test, correlation and frequencies) using SPSS 10.0 for Windows. Results revealed no significant difference between the calculated MLI (70 cm, 1 m and 1.5 m distance) and actual MLI, however calculated MLI from 35 cm distance was significantly different from the actual MLI value (p < 0.01). The highest correlation was between calculated MLI (70 cm distance) and actual MLI. However, the highest percentage of results from a distance of 70 cm also fitted within +/- 0.3 mm; +/- 0.5 mm and +/- 1 mm difference from the actual MLI values. However, the results obtained from 1 m distance were also satisfactory. The technique of use of digital photography is of proven value in calculating the width of a maxillary central incisor. The photographs using a simple digital camera should be taken from a distance from 70 cm to 1 m. Saving such photographs in a dental office may eventually be helpful for calculating dimensions of artificial teeth.