Photocatalytic H2 production on trititanate nanotubes coupled with CdS and platinum nanoparticles under visible light: revisiting H2 production and material durability.

نویسندگان

  • Hyunwoong Park
  • Hsin-Hung Ou
  • Minju Kim
  • Unseock Kang
  • Dong Suk Han
  • Michael R Hoffmann
چکیده

The photocatalytic production of molecular hydrogen (H2) on ternary composites of Pt, CdS, and sodium trititanate nanotubes (NaxH2-xTi3O7, TNTs) is examined in an aqueous 2-propanol (IPA) solution (typically 5 vol%) at a circum-neutral pH under visible light (λ > 420 nm). The H2 production rates are dependent on the Pt-loading level, and the optimum production rate in the Pt/CdS/TNTs is approximately six times higher than that in Pt/CdS/TiO2. A D2O solution containing 5 vol% IPA leads only to the production of D2 molecules, whereas increasing the IPA amount to 30 vol% leads to the production of DH molecules. This indicates that the Pt/CdS/TNTs composites enable H2 production via true water splitting under our typical experimental conditions. X-ray photoelectron spectroscopy (XPS) analyses of the as-synthesized Pt/CdS/TNTs and those used for 6 and 12 h show that metallic Pt on the CdS/TNTs is less susceptible to oxidation than Pt on CdS/TiO2. In addition, photocorrosion of CdS (i.e., sulfate formation) is significantly inhibited during the photocatalytic H2 production reactions in the Pt/CdS/TNTs because of the efficient charge transfer via the TNTs framework. The Pt/CdS/TNTs samples are thermally more stable than Pt/CdS/TiO2 and CdS/TNTs, effectively inhibiting the formation of CdO during the thermal synthesis. Detailed surface characterizations of the as-synthesized ternary composites are performed using X-ray diffraction, transmission electron microscopy, energy dispersive spectroscopy, and XPS.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of multicomponent photocatalysts for hydrogen production under visible light using water-soluble titanate nanodisks.

We report the design of efficient multicomponent photocatalysts (MPs) for H2 production under visible light by using water-soluble ultrathin titanate nanodisks (TNDs) stabilized by tetraethylammonium cations (TEA(+)) as building blocks. The photocatalysts are designed in such a way to significantly enhance simultaneously the efficiency of the three main steps in the photocatalytic process i.e.,...

متن کامل

Photocatalytic Hydrogen Production with Visible Light over Pt-Interlinked Hybrid Composites of Cubic-Phase and Hexagonal- Phase CdS

A hybrid photocatalytic system, which is based on a mixed-phase cadmium sulfide matrix composed of nano-particulate cubic-phase CdS (c-CdS) with average particle diameters of 13 nm and a bandgap energy of 2.6 eV, is coupled with bulk-phase hexagonal CdS (hex-CdS) that has a bandgap energy of 2.3 eV and is interlinked with elemental platinum deposits. The resulting hybrid nano-composite catalyst...

متن کامل

Preparation and enhanced visible-light photocatalytic H2-production activity of CdS-sensitized Pt/TiO2 nanosheets with exposed (001) facets.

CdS-sensitized Pt/TiO(2) nanosheets with exposed (001) facets were prepared by hydrothermal treatment of a Ti(OC(4)H(9))(4)-HF-H(2)O mixed solution followed by photochemical reduction deposition of Pt nanoparticles (NPs) on TiO(2) nanosheets (TiO(2) NSs) and chemical bath deposition of CdS NPs on Pt/TiO(2) NSs, successively. The UV and visible-light driven photocatalytic activity of the as-prep...

متن کامل

Photocatalytic production of hydrogen on Ni/NiO/KNbO3/CdS nanocomposites using visible light†

The photocatalytic production of H2 from water splitting was demonstrated on Ni/NiO/KNbO3/CdS nanocomposites using visible light irradiation at wavelengths >400 nm in the presence of isopropanol. The inherent photocatalytic activity of bulk-phase CdS was enhanced by combining Q-sized CdS with KNbO3 and Ni deposited on KNbO3. Enhanced activity is most likely due to effective charge separation of...

متن کامل

The function-led design of Z-scheme photocatalytic systems based on hollow carbon nitride semiconductors.

A ternary photocatalyst has been successfully constructed through the integration of Au, CdS and hollow carbon nitride nanospheres (HCNS), where Au nanoparticles were designed to shuttle interparticle transfer of charge carriers between CdS and HCNS photosensitizers to establish two-photon (Z-scheme) photocatalytic tandem systems for solar fuel production. The solid-state CdS-Au-HCNS Z-scheme n...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Faraday discussions

دوره 198  شماره 

صفحات  -

تاریخ انتشار 2017