Numerical Simulation of Film Formation in Tablet Coating

نویسندگان

  • G. TOSCHKOFF
  • W. TRITTHART
  • J. G. KHINAST
چکیده

The application of a coating layer on a tablet is a commonly used technique to selectively control tablet characteristics. Among the most important functions of the coating is the regulation of the release of active ingredient. In the course of a typical coating process, the tablet passes a spray zone multiple times. Each time, a partial coating layer is applied. For each tablet, this is repeated numerous times until a film of desired thickness is achieved. The number of repetitions needed as well as the quality of the final coating depends strongly on the quality of the partial coating. Therefore, it is of great interest to study the outcome of a single coating event in detail.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigating dissolution performance critical areas on coated tablets: a case study using terahertz pulsed imaging.

During the process development of coated tablets, knowledge on the formation and the location of film coating 'weak spots' is a key factor to the success of the process and the resulting product batch. It is understood that the performance of the product batch may be greatly limited, and often compromised, by weak spots on the tablet film coat. This study uses circular, biconvex tablets to inve...

متن کامل

Formulation of a Sedative Film Coated Tablet from Extracts of Melissa officinalis and Valeriana officinalis

Anxiety is feeling of danger in a person who is threatening with something. Nowadays, anxiety is increased in different populations and, thus it is became an important problem in many countries. Melissa officinalis (Melissa) and Valeriana officinalis (Valerian) are two medicinal plants. These two plants are traditionally used as sedative herbal drugs and new studies on their pharmacological act...

متن کامل

The influence of additives on the spreading coefficient and adhesion of a film coating formulation to a model tablet surface.

The surface energies of film coating formulations based on hydroxypropyl methylcellulose and containing microcrystalline cellulose, lactose and Tween 20, respectively, have been assessed. The approach taken allowed the components of the surface energy, in terms of the Lifshitz-van der Waals and the acid-base contributions, to be determined. Spreading coefficients of these coating formulations w...

متن کامل

A Quality by Design Approach for Coating Process Parameter Optimization

Film coating is an essential unit operation in tablet manufacturing. Most tablet dosage forms in the market are film coated. The main purpose for coating of immediate release film dosage form is to provide colour identification, to enhance the stability, taste masking. It is also noted that film coating can improve the processibility and handling during pharmaceutical manufacturing and is the m...

متن کامل

Effect of Alkali and Heat Treatment on Biomimetic HA Coating on Ti6Al4V

In this study, time of calcium phosphate formation on Ti6Al4V alloy with or without alkali and heat treatments was investigated. Specimens were soaked in 0, 5, 10 M solutions of NaOH at temperatures of 60 or 80 °C for 24, 72 h. Their surfaces were characterized using scanning electron microscopy and thin film X-ray diffraction. It was found that optimum condition is 72h soaking in 5 M NaOH in 8...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010