An Analysis of Regenerative Braking and Energy Saving for Electric Vehicle with In-Wheel Motors
نویسندگان
چکیده
Based on the structural features of electric vehicle (EV) driven by in-wheel motors and the characteristics of low speed as well as high torque for in-wheel motors, regenerative braking method for in-wheel motors has been presented. All braking torque for vehicle deceleration is output by in-wheel motors under Medium-intensity braking condition for the sake of recovering the maximum braking energy. The vehicle dynamics model that includes the hydraulic braking system and in-wheel motors driving system has been built by AMESim software. Simulation has been carried out for vehicle driving conditions by NEDC cycle and FTP75 cycle. The result shows that the recovery rate of braking energy is increased dramatically by in-wheel motor braking method. The energy efficiency of electric vehicle has been improved more than 30%. It is significant for electric vehicles to increase driving range and reduce costs.
منابع مشابه
Antilock Regenerative Braking System Design for a Hybrid Electric Vehicle
Hybrid electric vehicles employ a hydraulic braking system and a regenerative braking system together to provide enhanced braking performance and energy regeneration. In this paper an integrated braking system is proposed for an electric hybrid vehicle that include a hydraulic braking system and a regenerative braking system which is functionally connected to an electric traction motor. In the ...
متن کاملDesign of an anti-lock regenerative braking system for a series hybrid electric vehicle
In this paper, an adaptive rule based controller for an anti-lock regenerative braking system (ARBS) of a series hybrid electric bus (SHEB) has been proposed. The proposed controller integrates the regenerative braking and wheel anti-lock functions by controlling the electric motor of the hybrid vehicle, without using any conventional mechanical anti-lock braking system. The performance of the ...
متن کاملAn Investigation on the Effect of Using Regenerative Braking System on Energy Consumption Reduction of Hybrid Vehicles Based on Tehran City Driving Cycle
In driving and when you brake, a lot of energy is dissipated to stop the car; especially in urban areas where the vehicle is driving in a stop-and-go pattern. This energy, which is dissipated by the brake pads, can be stored in the vehiclechr('39')s battery. In Hybrid and Electric Vehicles, a regenerative brake can be used alongside the mechanical brakes to regenerate some energy while braking....
متن کاملRegenerative Intelligent Brake Control for Electric Motorcycles
Vehicle models whose propulsion system is based on electric motors are increasing in number within the automobile industry. They will soon become a reliable alternative to vehicles with conventional propulsion systems. The main advantages of this type of vehicles are the non-emission of polluting gases and noise and the effectiveness of electric motors compared to combustion engines. Some of th...
متن کاملType-2 Fuzzy Braking-Torque Electronic Stability Control for Four-Wheel Independent Drive Electric Vehicles
The electronic stability control (ESC) system is one of the most important active safety systems in vehicles. Here, we intend to improve the Electronic stability of four in-wheel motor drive electric vehicles. We will design an electronic stability control system based on Type-2 fuzzy logic controller. Since, Type-2 fuzzy controller has uncertainty in input interval furthermore of output fuzzin...
متن کامل