Preparation of high-permeability NiCuZn ferrite.

نویسندگان

  • Jun Hu
  • Mi Yan
چکیده

Appropriate addition of CuO/V2O5 and the reduction of the granularity of the raw materials particle decrease the sintering temperature of NiZn ferrite from 1200 degrees C to 930 degrees C. Furthermore, the magnetic properties of the NiZn ferrite prepared at low temperature of 930 degrees C is superior to that of the NiZn ferrite prepared by sintering at high temperature of 1200 degrees C because the microstructure of the NiZn ferrite sintered at 930 degrees C is more uniform and compact than that of the NiZn ferrite sintered at 1200 degrees C. The high permeability of 1700 and relative loss coefficient tandelta/mu(i) of 9.0x10(-6) at 100 kHz was achieved in the (Ni0.17Zn0.63Cu0.20)Fe1.915O4 ferrite.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultra-low percolation threshold in ferrite-metal cofired ceramics brings both high permeability and high permittivity

High permeability and high permittivity are hard to be achieved simultaneously, either in single-phased materials or in composite materials, such as ferrite-ferroelectric ceramic composites and ferrite-metal percolative composites. In this work, ultra-low percolation threshold is achieved in NiZnCu ferrite-Ag cofired ceramics, which endows the composite with both high permeability and high perm...

متن کامل

Influence of Small Addition of Ti4+ Ions on the Properties of High Permeability Ferrite

Mn-Zn ferrites substituted with Ti4+ ions are now becoming commercially important. The substitution with titanium ions in Mn-Zn ferrite is recommended for ferrites with low losses and low temperature factor of initial permeability, Tdpi because of the shift of the secondary maximum of permeability, SMP, towards lower temperatures [I] and the increase of he d.c.resistivity [3,4,5]. The present p...

متن کامل

Synthesis and Structural Characterization of Nickel Substituted Manganese Zinc Nanoferrites

Magnetic oxides are naturally occurring minerals. In order to understand their unique properties and their utilization in technological applications, one must fully understand the correlation between chemistry, structure, particle size and processing. Among the broad classification of magnetic oxides, the spinel ferrites gain much importance because of their low cost, high magnetic permeability...

متن کامل

TEMPERATURE AND FREQUENCY DEPENDENT PERMEABILITY OF SPINEL TYPE Li-Cd FERRITE

A series of Li-Cd ferrite samples of composition Li0.5-x/2CdxBi0.02Fe2.48-x/2O4 for x = 0.0 to 0.7 were prepared by conventional double sintering ceramic technique. From temperature dependent permeability, μ′ at T=TC indicates that the samples have high homogeneity according to Globus et al. The Curie temperature, TC is found to decrease with increasing Cd content. The sample with x=0.7 shows a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of Zhejiang University. Science. B

دوره 6 6  شماره 

صفحات  -

تاریخ انتشار 2005