Enhanced removal of Cr(VI) from aqueous solution using polypyrrole/Fe3O4 magnetic nanocomposite.

نویسندگان

  • Madhumita Bhaumik
  • Arjun Maity
  • V V Srinivasu
  • Maurice S Onyango
چکیده

Fe(3)O(4) coated polypyrrole (PPy) magnetic nanocomposite was prepared via in situ polymerization of pyrrole monomer for the removal of highly toxic Cr(VI). Structure and morphology of the prepared nanocomposite were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction pattern, Field emission scanning electron microscopy (FE-SEM) and high resolution transmission electron microscopy (HR-TEM). Electron spin resonance (ESR) studies confirmed that the nanocomposite is magnetic in nature. Up to 100% adsorption was found with 200mg/L Cr(VI) aqueous solution at pH 2. Adsorption of Cr(VI) on the surface of the adsorbent was confirmed by the ATR-FTIR and X-ray photoelectron spectroscopy (XPS). XPS studies also suggested that ion exchange and reduction on the surface of the nanocomposite may be the possible mechanism for Cr(VI) removal by the PPy/Fe(3)O(4) nanocomposite. Adsorption results showed that Cr(VI) removal efficiency by the nanocomposite decreased with an increase in pH. Adsorption kinetics was best described by the pseudo-second-order rate model. Isotherm data fitted well to the Langmuir isotherm model. Thermodynamic study revealed that the adsorption process is endothermic and spontaneous in nature. Desorption experiment showed that in spite of the very poor recovery of the adsorbed Cr(VI); the regenerated adsorbent can be reused successfully for two successive adsorption-desorption cycles without appreciable loss of its original capacity.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Kinetic Study on Adsorption of Congo Red from Aqueous Solution by ZnO-ZnFe2O4-polypyrrole Magnetic Nanocomposite

In this work, magnetically separable ZnO-ZnFe2O4-PPy nanocomposite as an efficient adsorbent was synthesized by two steps. At first, zinc oxide (ZnO) and ZnFe2O4 nanoparticles were synthesized using simple and facile precipitation method. Then, ZnO-ZnFe2O4 mixed oxide was modified by polypyrrole (PPy). The adsorbent was character...

متن کامل

One-Pot synthesis, characterization and adsorption studies of amine-functionalized magnetite nanoparticles for removal of Cr (VI) and Ni (II) ions from aqueous solution: kinetic, isotherm and thermodynamic studies

BACKGROUND Discharge of heavy metals such as hexavalent chromium (Cr (VI)) and nickel (Ni (II)) into aquatic ecosystems is a matter of concern in wastewater treatment due to their harmful effects on humans. In this paper, removal of Cr (VI) and Ni (II) ions from aqueous solution was investigated using an amino-functionalized magnetic Nano-adsorbent (Fe3O4-NH2). METHODS An amino-functionalized...

متن کامل

Chemical design of a smart chitosan-polypyrrole-magnetite nanocomposite toward efficient water treatment.

A magnetic chitosan-polypyrrole-magnetite (Cs-PPy-Fe3O4) nanocomposite is prepared in a simple one-step method via in situ chemical polymerization of pyrrole using anhydrous FeCl3 as an oxidant in the presence of Cs. Magnetic Fe3O4 nanoparticles of size in the range of 10-20 nm are successfully introduced into the Cs-PPy matrix. Adsorption of an anionic dye (acid green 25, AG) from aqueous solu...

متن کامل

Graphene oxide–magnetite nanocomposite as an efficient and magnetically separable adsorbent for methylene blue removal from aqueous solution

We report a facile method to produce a magnetically separable graphene oxide–magnetite nanocomposite (GO–Fe3O4) and its adsorption performance in methylene blue (MB) removal from aqueous solution. The GO–Fe3O4 nanocomposite was synthesized by a solution-phase self-assembly method including the incorporation of monodisperse Fe3O4 nanoparticles (NPs) and GO in a dimethylformamide/chloroform mixtu...

متن کامل

Response Surface Methodology Optimization of Cobalt (II) and Lead (II) Removal from Aqueous Solution Using MWCNT-Fe3O4 Nanocomposite

The present investigation describes the evaluation of feasibility of MWCNT-Fe3O4 nanocomposite toward adsorptive removal of Co(II) and Pb(II) from aqueous solution in batch mode. The Fe3O4–MWCNT hybrid was prepared using a simple one-pot strategy via in situ growth of Fe3O4 magnetic nanoparticles onto the surface of the MWCNT...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of hazardous materials

دوره 190 1-3  شماره 

صفحات  -

تاریخ انتشار 2011