‘‘Measurements of Lead, Bismuth and Selenium Discharge From Water Service Valves and Fittings Manufactured From Sebiloy (EnviroBrass II) Brass Alloy’’
نویسندگان
چکیده
منابع مشابه
A Simple, Cost-Effective Sensor for Detecting Lead Ions in Water Using Under-Potential Deposited Bismuth Sub-Layer with Differential Pulse Voltammetry (DPV)
This research has developed a simple to use, cost effective sensor system for the detection of lead ions in tap water. An under-potential deposited bismuth sub-layer on a thin gold film based electrochemical sensor was designed, manufactured, and evaluated. Differential pulse voltammetry (DPV) measurement technique was employed in this detection. Tap water from the Cleveland, OH, USA regional w...
متن کاملSelenium transfer to metal phase at Pd–Bi alloy/Se-containing borosilicate glass interface
During reductive heat-treatment of bismuth borosilicate glass with palladium and selenium, palladium is extracted along with bismuth as a liquid metal phase. Selenium may then be extracted from the oxide phase in a subsequent water-leaching step. However, selenium extraction can be hindered by partial transfer of the selenium to the metal. To suppress such selenium transport, the effect of vary...
متن کاملEffects of fluoridation and disinfection agent combinations on lead leaching from leaded-brass parts.
This study concerns effects on water-borne lead from combinations of chlorine (CL) or chloramines (CA) with fluosilicic acid (FSA) or sodium fluoride (NaF). CL is known to corrode brass, releasing lead from plumbing devices. It is known that CA and CL in different ratios with ammonia (NH) mobilize copper from brass, which we have found also enhances elution of lead from leaded brass alloys. Pha...
متن کاملEvaluation of Lead Release in a Simulated Lead-Free Premise Plumbing System Using a Sequential Sampling Approach
In this pilot study, a modified sampling protocol was evaluated for the detection of lead contamination and locating the source of lead release in a simulated premise plumbing system with one-, three- and seven-day stagnation for a total period of 475 days. Copper pipes, stainless steel taps and brass fittings were used to assemble the "lead-free" system. Sequential sampling using 100 mL was us...
متن کاملMeasurements of output factors using different ionization chambers and build up caps
Background: The aim of this work was to study the output factors for Linac using different ionization chambers and build up caps. Materials and Methods: Output factors were measured for open square fields (3 × 3 cm to 40 × 40 cm) defined by collimator jaws for 6 and 15 MV photon beams from a Varian Clinac 2100C accelerator were measured. The measurements in air were performed using Com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006