Analyses of the robustness of the mathematical model with the laboratory prototype of the drilling process during simulation and vibration control experiments
نویسندگان
چکیده
The drilling industry is faced with many challenges, and the sudden failure of a drill string during drilling is one of major concern. Exploration of the causes for the failures reveals vibrations as the major cause. In order to test and analyze the vibration patterns of rotary drilling, a laboratory proto type of the process is set up. The mathematical model developed to analyze the vibration presents residual error. Robustness issues pertaining to model error and modelling error is discussed. Methods to counter the errors and minimize the vibrations are also discussed.
منابع مشابه
Simulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods
Since the electric motor of pure electric vehicle replaced the engine, the "masking effect" disappears, and the problem of vibration and noise of the transmission becomes prominent. This is generated during the gear meshing and is transmitted to the housing through the shaft and bearing. Thereby, radiation noise of the housing are generated. The prediction and analysis...
متن کاملTwo-phase Simulation of Well Control Methods for Gas Kicks in Case of Water and Oil-based Muds
Kick occurrence is a possible event during a drilling process. It is required to be handled immediately using a well control method to avoid blowout, financial losses and damages to the drilling crew. Several methods including driller, wait and weight, and concurrent are applicable in the drilling industry to control a well during a kick incident. In this study, typical well control methods wer...
متن کاملTemperature in bone drilling process: Mathematical modeling and Optimization of effective parameters (TECHNICAL NOTE)
Bone drilling process is the most prominent process in orthopedically surgeries and curing bone breakages. It is also very common in dentistry and bone sampling operations. Due to complexity of the material that is machined, bone, and the sensitivity of the process, bone drilling is one of the most important, common and sensitive processes in biomedical engineering field. The most critical prob...
متن کاملDevelopment of Mathematical Model for Controlling the Drilling Parameters with a Screw Downhole Motor
Article presents results of study on possibility of increasing the efficiency of drilling directional straight sections of wells using screw downhole motors (SDM) with a combined method of drilling with rotation of drilling string (DS). Goal is to ensure steady-state operation of SDM with simultaneous rotation of DS by reducing the amplitude of oscillations with adjusting the parameters of dril...
متن کاملAnalysis of Response Robustness for a Multi-Objective Mathematical Model of Dynamic Cellular Manufacturing
The multi-objective optimization problem is the main purpose of generating an optimal set of targets known as Pareto optimal frontier to be provided the ultimate decision-makers. The final selection of point of Pareto frontier is usually made only based on the goals presented in the mathematical model to implement the considered system by the decision-makers. In this paper, a mathematical model...
متن کامل