Tuning the crystalline and mesophase structure of olefin block copolymer through self-nucleation and annealing treatments.
نویسندگان
چکیده
As a type of novel semi-crystalline block copolymers, the final properties of olefin block copolymers (OBCs) greatly depend on the crystalline and phase-separated structures. In the present work, we systematically investigated the influence of self-nucleation and annealing on the lamellar and mesophase-separated structure of OBCs. According to the crystalline and melting behavior after self-nucleation and annealing treatments, four different regimes can be recognized with the self-seeding temperature Ts varying from 125 to 109 °C. In regime A, only self-nucleation occurs, while it coexists with lamellar thickening in regime B. In regime C, there is only lamellar thickening behavior. The lamellar thickening induced inconsecutive lamellar crystals observed revealed that the rearrangement of the hard blocks, which are next to the soft blocks and trapped in the intermediate regime between crystalline and amorphous phases, into neighboring lamellar crystals should be the mechanism for the lamellar thickening of the OBCs. Surprisingly, no lamellar thickening occurs and a new small melting peak appears at lower temperatures in regime D. Considering the block dispersity of OBCs, the emergence of a small melting peak at lower temperatures can be attributed to the crystallization of the ethylene sequence with relatively weaker crystallization abilities, which are not able to crystallize in a standard crystalline state. Based on these findings, we gained some new understandings on lamellar thickening behavior of OBCs and established the self-nucleation and annealing process as a powerful tool for tuning the crystalline and phase-separated structures of OBCs.
منابع مشابه
Controlling the morphology of side chain liquid crystalline block copolymer thin films through variations in liquid crystalline content.
In this paper, we describe methods for manipulating the morphology of side-chain liquid crystalline block copolymers through variations in the liquid crystalline content. By systematically controlling the covalent attachment of side chain liquid crystals to a block copolymer (BCP) backbone, the morphology of both the liquid crystalline (LC) mesophase and the phase-segregated BCP microstructures...
متن کاملTuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts
SiO2-supported silyl chromate catalyst is an important industrial catalyst for production of high grade HDPE pipe materials. The control of the short chain branch (SCB) distribution using this catalyst system is still a great challenge. In this work, ethylene and 1-hexene copolymers were synthesized using SiO2-supported silyl chromate catalyst combined with triisobutylaluminium (TIBA), triethyl...
متن کاملSynthesis and characterization of mesoporous zirconium oxide thin films
Zirconium oxide (ZrO2) has generated wide interest because of its potential in applications such as solid oxide fuel cells, catalysts and optical devices. In these applications, it is important to control the grain size of the material and increase the surface area by introducing porosity with tailored pore size. This paper presents a synthesis route for the preparation of mesoporous zirconia u...
متن کاملPii: S0032-3861(00)00233-0
In side-chain liquid crystalline diblock copolymers, driving forces for ordering of the material may be provided by the chemical incompatibility between the blocks and by the liquid crystalline nature of one of the blocks. We study the microstructure and its development from initially isotropic solutions in side-group liquid crystalline copolymers based on styrene–isoprene diblocks. Hierarchica...
متن کاملTexture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree
It has been clarified that deformation and annealing of martensite starting structure can produce ultrafine-grained structure in low carbon steel. This study aims to investigate the texture evolution and mechanical properties of samples with martensite structure deformed by two different forging processes. The martensitic steel samples were forged by plane strain compression and multi-directio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical chemistry chemical physics : PCCP
دوره 17 24 شماره
صفحات -
تاریخ انتشار 2015