Electro - Mechanical Resonant Magnetic Field Sensor

We describe a new type of magnetic field sensor which is termed an ElectroMechanical Resonant Sensor (EMRS). The key part of this sensor is a small conductive elastic element with low damping rate and therefore a high Q fundamental mode of frequency f1. An AC current is driven through the elastic element which, in the presence of a magnetic field, causes an AC force on the element. When the frequency of the AC current matches the resonant frequency of the element, maximum vibration of the element occurs and this can be measured precisely by optical means. We have built and tested a model sensor of this type using for the elastic element a length of copper wire of diameter 0.030 mm formed into a loop shape. The wire motion was measured using a light emitting diode phototransistor assembly. This sensor demonstrated a sensitivity better than 0.001G for an applied magnetic field of ∼ 1G and a good selectivity for the magnetic field direction. The sensitivity can be easily improved by a factor of ∼ 10 − 100 by more sensitive measurement of the elastic element motion and by having the element in vacuum to reduce the drag force.