Changes in thermodynamic interactions at highly immiscible polymer/polymer interfaces due to deuterium labeling.
نویسندگان
چکیده
Deuterium labeling has been shown previously to affect thermodynamic interactions at polymer surfaces, polymer/polymer heterogeneous interfaces, and in bulk (away from a surface or interface). However, the changes in polymer-polymer interactions due to deuterium labeling have not been thoroughly investigated for highly immiscible systems. It is shown here that deuterium labeling can influence polymer-polymer interactions at heterogeneous interfaces with highly immiscible systems, namely, polystyrene/poly(2-vinylpyridine) (PS/P2VP), polystyrene/poly(4-vinylpyridine) (PS/P4VP), and polystyrene/poly(methyl methacrylate) (PS/PMMA). Using secondary ion mass spectrometry, segregation of deuterium labeled polystyrene (dPS) in a dPS + unlabeled PS (dPS:hPS) blend layer was observed at the dPS:hPS/hP2VP, dPS:hPS/hP4VP, and dPS:hPS/hPMMA heterogeneous interfaces. However, a reference system involving PS on a PS brush shows no segregation of dPS to the interface.
منابع مشابه
Monte Carlo Simulations of Interfaces in Polymer Blends
We review recent simulation studies of interfaces between immiscible homopolymer phases. Special emphasis is given to the presentation of efficient simulation techniques and powerful methods of data analysis, such as the analysis of capillary wave spectra. Possible reasons for polymer incompatibility and ways to relate model dependent interaction parameters to an effective Flory Huggins paramet...
متن کاملInterfacial activity of particles at PI/PDMS and PI/PIB interfaces: analysis based on Girifalco–Good theory
Particles that are partially wetted by oil and water are known to adsorb at oil/water interfaces. By the same mechanism, particles that are partially wetted by two immiscible polymers should adsorb at the interface between those two polymers. However, since chemical differences between immiscible polymers are relatively modest, particle adsorption at polymer/polymer interfaces may be expected t...
متن کاملEffect of Carbon Nanotube and Surfactant on Processing, Mechanical, Electrical and EMI-Shielding of Epoxy Composites
Dispersing nanoparticles in a polymer matrix is intrinsically challenging due to unfavorable entropic interactions between the matrix and the nanoparticle. In this research dispersion of nanoparticles in polymer matrix was studied and the effect of dispersion on properties was investigated. The properties of polymer composite depend on the type, size, shape, concentration of nanoparticles, and ...
متن کاملAn Influence of Polymer-Alkaline and Nanoparticles as Chemical Additives on the Immiscible Displacement and Phase Relative Permeability
In this study, a chemical additive made by a combination of polymer, alkaline, and silica nanoparticles is used to control the oil recovery and relative permeability curves. Various parametersincluding the type and concentration of polymer, alkaline, and nanosilica particles have been studied.To evaluate the efficiency of these additives, we performed unsteady state displaceme...
متن کاملCompatibilization of immiscible polymer blends using graphene oxide sheets.
By taking the advantage of the unique amphiphilic structure of graphene oxide sheets (GOSs), we develop here a new and effective strategy for compatibilizing immiscible polymer blends. With the incorporation of only 0.5 wt % GOSs into immiscible polyamide/polyphenylene oxide (PA/PPO, 90/10) blends, the droplet diameter of the dispersed minor phase (PPO) is dramatically reduced by more than 1 or...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The journal of physical chemistry. B
دوره 110 22 شماره
صفحات -
تاریخ انتشار 2006