Impact of density differences on turbulent round jets

نویسندگان

  • P. Wang
  • J. Fröhlich
  • V. Michelassi
  • W. Rodi
چکیده

Jets with different density than the fluid into which they are issued, constitute an important class of flows relevant for applications in technical and environmental situations. In this work three cases of variable-density turbulent round jets discharging from a straight circular pipe into a weakly confined low-speed co-flowing air stream are studied with the aid of large eddy simulation. The density ratios considered are 0.14 [Helium/air], 1.0 [air/air] and 1.52 [CO2/air], with Reynolds numbers of 7000, 21000 and 32000, respectively. These computations closely correspond to experiments performed by F. Anselmet and co-workers. Detailed comparisons of the statistics show good agreement with the corresponding experiments. From a physical point of view it is observed that lower-density jet develop more rapidly than denser jets with the same exit momentum flux. Pseudo-similarity behavior in the three variable-density round jets is well reproduced in the simulation. The coherent structures of the three jets are investigated by visualization of the iso-surface of pressure fluctuations and vorticity. In the developing stage of the Kelvin-Helmholtz instability, large finger-shape regions of vorticity are observed for the helium jet close to the nozzle lip. This feature, however, is not found in the air and the CO2 jet. The occurrence of strong streamwise vorticities across the shear layer in the helium jet is demonstrated by a characteristic quantity related to the orientation of the vorticity. The computations were all performed on the HP-XC cluster of the SSC in Karlsruhe.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface

In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...

متن کامل

Large Eddy Simulation of Variable Density Turbulent Axisymmetric Jets

Three cases of variable-density turbulent round jets discharging from a straight circular pipe into a weakly confined low-speed co-flowing air stream are studied with the aid of large eddy simulation. The density ratios considered are 0.14 [He/air], 1.0 [air/air] and 1.5 [CO2/air], with Reynolds numbers of 7000, 21000 and 32000, respectively. Detailed comparisons of the statistics show good agr...

متن کامل

Numerical Simulation of Free Surface in the Case of Plane Turbulent Wall Jets in Shallow Tailwater

Wall-jet flow is an important flow field in hydraulic engineering, and its applications include flow from the bottom outlet of dams and sluice gates. In this paper, the plane turbulent wall jet in shallow tailwater is simulated by solving the Reynolds Averaged Navier-Stokes equations using the standard  turbulence closure model. This study aims to explore the ability of a time splitting method ...

متن کامل

Primary Breakup of Turbulent Round Liquid Jets in Uniform Crossflows

Anexperimental investigation of the deformation andbreakupproperties of turbulent round liquid jets in uniform gaseous crossflows is described. Pulsed shadowgraphandholographobservationswere obtained for turbulent round liquid jets injected normal to air crossflow in a shock tube. Crossflow velocities of the air behind the shock wave relative to the liquid jet were subsonic (36–90 m=s) and the ...

متن کامل

Numerical Study of Interaction of Two Plane Parallel Jets

In the present work, a numerical simulation of two parallel turbulent jets was performed. The simulations were carried out by using the  standard, the  standard and the RSM models. A parametric study was also presented to determine the effect of the nozzles spacing and velocity ratio on the axial and transverse positions of the merge and combined points. Correlations between the various paramet...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008